FTS 047-300-4,5
N.º de identificação 1598242
- Faixa de medição Fx, Fy: ± 125 N
- Faixa de medição Fz: ± 300 N
- Faixa de medição Mx, My: ± 4.5 Nm
- Faixa de medição Mz: ± 4.5 Nm
- Classe de proteção IP: 67
Detalhes técnicos
| Peso [kg] | 0.13 |
|---|---|
| Classe de proteção IP | 67 |
| Faixa de medição Fx, Fy [N] | ± 125 |
| Faixa de medição Fz [N] | ± 300 |
| Faixa de medição Mx, My [Nm] | ± 4.5 |
| Faixa de medição Mz [Nm] | ± 4.5 |
| Resolução Fx, Fy [N] | 0.0063 |
| Resolução Fz [N] | 0.012 |
| Resolução Mx, Minha [Nm] | 1.8E-4 |
| Resolução Mz [Nm] | 1.4E-4 |
| Desvio relativo da exibição em relação à faixa de medição | <1,0 %-fs |
| Desvio máximo de exibição Fx, Fy [N] | 1.25 |
| Desvio máximo de exibição Fz [N] | 3.0 |
| Desvio máximo de exibição Mx, My, Mz [Nm] | 0.045 |
| Taxa máx. de amostragem [Hz] | 1000.0 |
| Taxa máx. de saída (UDP) [Hz] | 2000.0 |
| Informações sobre acessórios | Além do sensor FTS, são necessários um cabo de conexão e uma caixa de interface |
Rozměry a maximální zatížení
Rozměry a maximální zatížení
Všechny síly a momenty působící na snímač musí být ve stanoveném měřicím rozsahu.
Překročení rozsahu měření snižuje maximální počet zatěžovacích cyklů a může vést k poškození snímače. Pokud aplikace překračuje měřicí rozsah, kontaktujte nás.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Measuring accuracy
< 1% of the upper limit value of the measuring range at 22 °C
Splash water protection
IP67 as standard
Housing
Aluminum and stainless steel
Warranty
24 months