LDK-ES-0100
- Máx. derrame: 200 mm
- Força máxima motriz: 250 N
Detalhes técnicos
| Conceito de acionamento | Acionamento direto linear |
|---|---|
| Máx. curso H [mm] | 200.0 |
| Força máxima motriz [N] | 250.0 |
| Força nominal [N] | 115.0 |
| Capacidade de carga máx. (vertical) [kg] | 3.0 |
| Precisão de repetição [mm] | ± 0.01 |
| Máx. rapidez [m/s] | 4.0 |
| Máx. aceleração [m/s²] | 40.0 |
| Máx. atual [A] | 7.5 |
| Corrente máxima de parada [A] | 1.98 |
| Min. temperatura ambiente [°C] | 5.0 |
| Máx. temperatura ambiente [°C] | 40.0 |
| Peso da corrediça e motor [kg] | 2.87 |
| Peso das placas de extremidade [kg] | 0.23 |
| Massa adicional por curso de 100 mm [kg] | 0.34 |
| Comprimento X [mm] | 212.0 |
| Largura Y [mm] | 85.0 |
| Altura Z [mm] | 69.0 |
| Momento Mx máx. [Nm] | 88.0 |
| Momento My máx. [Nm] | 354.0 |
| Momento Mz máx. [Nm] | 354.0 |
| Força Fy máx. [N] | 5056.0 |
| Força Fz máx. [N] | 7584.0 |
| Força -Fz máx. [N] | 5056.0 |
| Comprimento A [mm] | 150.0 |
| Comprimento L [mm] | 212.0 |
| Comprimento L1 [mm] | 188.0 |
| Comprimento L2 [mm] | 106.0 |
Dimensions and maximum loads
Dimensions and maximum loads
The forces and torques shown here are maximum values for static loading.
General notes about the series
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
How to get to the online configurator
The configurator is either linked on the SCHUNK website via the appropriate linear unit or can https://schunk.com/de/de/konfigurator-linearmodule called up directly.
Guidance
Roller guide
Drive
Linear direct drive based on a 3-phase, electronically commutated and permanently excited AC synchronous liner motor
Stroke measuring system
Contactless, magnetic measuring system with incremental and absolute variants; with HIPERFACE®, 1Vss and DRIVE-CLiQ interfaces.
Profile
Width of steel guide rail
Slide
Aluminum slide, primary part and measuring system reading head directly integrated
Scope of delivery
Accessory pack with centering sleeves and assembly and operating manual with declaration of incorporation
Drive controller
Consultation on parameter settings for drive controllers from BOSCH (EcoDrive CS, IndraDrive and IndraDrive CS) and Siemens (Sinamics S120). Provision of motor data sheets for other drive controllers. Commissioning support on request.
Warranty
24 months
Service life characteristics
on request