KSP3 160-PM-BWA
Pneumatische klemkrachtblokken met klemsnelwisselsysteem
N.º de identificação 1479243
Pneumatische opspankrachtblok in standaardversie
Productkenmerken
Productkenmerken
- Klemkrachtblok met 2 klauwen
- Centrisch klemmen
- Standaard slag
- Pneumatische afvraging eindpositie
- Pneumatische contactdetectie
- Basisklemmen: Snel wisselen van klauwen
- Afmetingen: 160 x 160 x 108 mm
- Klemkracht bij max. bedrijfsdruk: 45 kN
- Slag per klem: 3 mm
- Max. klemhoogte: 41 mm
- Rondloopnauwkeurigheid: 0.01 mm
- Werkdruk: 2 - 9 bar
- Luchtverbruik per dubbele slag bij 6 bar: 3400 cm³
- Sluit-/openingstijd: 0.4 s
- Gewicht: 11.5 kg
Detalhes técnicos
| Stroke per jaw [mm] | 3.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 45.0 |
| Min. operating pressure [bar] | 2.0 |
| Max. operating pressure [bar] | 9.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 41.0 |
| Distance H [mm] | 19.5 |
| Air consumption per double stroke at 6 bar [cm³] | 3400.0 |
| Closing/opening time [s] | 0.4 |
| Weight [kg] | 11.5 |
Scope of delivery
Clamping force block, mounting screws, cover plugs, clamping sleeves, fitting screws, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)