MFT-R 390
Deburring spindle
ID 1451627
Deburring spindle MFT-R, Size: 490, pneumatic
- Max. compensation X: ± 7.1 mm
- Max. compensation Y: ± 7.1 mm
Technical details
Min. radial compensation force [N] | 9.4 |
---|---|
Max. compensation angle X [°] | ± 1.6 |
Nominal speed [1/min] | 2600.0 |
Tool holder | Collet DA 6 mm and 8 mm |
Noise emission [dB(A)] | 50 |
Weight [kg] | 4.42 |
Min. ambient temperature [°C] | 5.0 |
Max. ambient temperature [°C] | 35.0 |
Max. compensation X [mm] | ± 7.1 |
Max. compensation Y [mm] | ± 7.1 |
Force Fy max. [N] | 70.0 |
Force Fx max. [N] | 70.0 |
Height Z [mm] | 413.0 |
Nominal torque [Nm] | 1.4 |
Axis fixation | integrated |
Max. compensation angle Y [°] | ± 1.6 |
Operating pressure [bar] | 6.2 |
Max. radial compensation force [N] | 70.0 |
maximum air consumption [l/s] | 9.0 |
Standstill torque [Nm] | 2.7 |
Diameter D [mm] | 112.7 |
Compensation air connection | 4 mm |
Power [W] | 390.0 |
Recommended compensation path [mm] | ± 3.6 |
Air connection spindle | G1/4" |
Min. compensating pressure [bar] | 1.0 |
Idle speed [1/min] | 5600.0 |
Max. compensation pressure [bar] | 4.1 |
Dimensions and maximum loads
Dimensions and maximum loads
The indicated torques and forces are static values, apply for each base jaw, and may occur simultaneously.
General notes about the series
Ambient conditions
Please note that the unit is notsuitable for use in an area where coolants or cutting fluids are present.
Mounting
on the robot arm or as a stationary unit
Actuation
pneumatic, via filtered (< 5 µm, dry) and oiled compressed air (3-4 drops per minute)
Scope of delivery
Spindle with collet.
Warranty
24 months