BSWS-R-PGZN-plus
機能
断面図
断面図
BSWS-Rは、ワーク固有のグリッパーフィンガーにしっかりとねじ固定されたベースと、交換するグリッパーのベースジョーに固定されている 2 本のアダプターピンで構成されています。フォームフィットロック機構により、グリッパーフィンガーの迅速な交換が保証されます。グリッパーフィンガーは、収納ステーションに引き込まれることで交換され、ロック機構が作動します。その結果、グリッパーフィンガーは上方に伸ばされても堆積ステーション内に留まります。各グリッパージョーには、アダプターピン2本(= BSWS-AR 1 セット)とベース(BSWS-BR)、収納ステーション(BSWS-SR)が必要です。
- 1
-
基本的なジョークイック・チェンジシステム BSWS-BR
- 2
-
ワークに合わせたグリッパーフィンガー固定
- 3
-
グリッパーのベースジョーに固定するアダプターピンBSWS-AR
- 4
-
スプリング予荷重ロッキングピン
- 5
-
ワーク固有のグリッパーフィンガーを装着するためのデポジットステーション BSWS-SR(基本ジョークイック・チェンジシステム BSWS-BR を含む)
自動ジョークイック・チェンジシステムBSWS-BR/BSWS-AR
ロック状態でのBSWS-BR、BSWS-ARアダプターピンなし
BSWS-BR in unlocked status in the deposit station BSWS-SR without adapter pin BSWS-AR
BSWS-BR in onvergrendelde toestand in het depotstation BSWS-SR met adapterpen BSWS-AR
BSWS-BR in vergrendelde toestand met adapterpen BSWS-AR
デポジットステーションBSWS-SR
Grijpvingerwissel in 3 stappen
Inductive monitoring of the presence of the BSWS-R in the BSWS-SR
RFID data carrier
自動ジョークイック・チェンジシステムBSWS-BR/BSWS-AR
ベーシックBSWS-BR(ワーク固有のグリッパーフィンガーにしっかりとネジ止め)とアダプターピンBSWS-AR(グリッパーのベースジョーにしっかりとネジ止め)の組み合わせにより、グリッパーのジョーの自動交換が可能です。
- 1
-
BSWS-AR ジョーツールチェンジアダプター
- 2
-
基本的なジョークイック・チェンジシステム BSWS-BR
- 3
-
ワーク専用グリッパーフィンガーの爪
ロック状態でのBSWS-BR、BSWS-ARアダプターピンなし
ロッキングピンはバネの予荷重により、標準でロックされた状態となっています。変更するには、グリッパーフィンガーをデポジットステーションBSWS-SRに収納する必要があります。
- 1
-
基本的なジョークイック・チェンジシステム BSWS-BR
- 2
-
ワーク固有のグリッパーフィンガー固定用金具
- 3
-
ジョークイックチェンジ・アダプター用取付穴 BSWS-AR
- 4
-
Spring preloaded locking pin
BSWS-BR in unlocked status in the deposit station BSWS-SR without adapter pin BSWS-AR
When the basic BSWS-BR is moved into the storage station BSWS-SR, the locking pin is pressed against a spring and thus unlocked. It is now possible to retract/extend the adapter pin BSWS-AR into the basic BSWS-BR.
- 1
-
Basic jaw quick-change system BSWS-BR
- 2
-
Fitting for fastening of the workpiece-specific gripper finger
- 3
-
Mounting bore for jaw quick-change adapter BSWS-AR
- 4
-
Voorgespannen borgpen met veer
- 5
-
Depotstation BSWS-SR
BSWS-BR in onvergrendelde toestand in het depotstation BSWS-SR met adapterpen BSWS-AR
Om de adapterpennen BSWS-AR in de basis BSWS-BR te vergrendelen, hoeft u enkel uit het depotstation BSWS-SR te gaan.
- 1
-
Basis van klemsnelwisselsysteem BSWS-BR
- 2
-
Schroefverbinding voor de bevestiging van de werkstukspecifieke grijpvinger
- 3
-
Snelwisseladapter voor klemmen BSWS-AR
- 4
-
Voorgespannen borgpen met veer
- 5
-
Depotstation BSWS-SR
BSWS-BR in vergrendelde toestand met adapterpen BSWS-AR
De verende borgpen wordt door de geïnstalleerde veer teruggedrukt in de vergrendelde stand, waardoor een positieve aansluiting ontstaat met de twee adapterpennen BSWS-AR. De veerkracht voorkomt dan dat de grijpvingers er weer uit vallen.
- 1
-
基本的なジョークイック・チェンジシステム BSWS-BR
- 2
-
ワーク固有のグリッパーフィンガー固定用金具
- 3
-
BSWS-AR ジョーツールチェンジアダプター
- 4
-
スプリング予荷重ロッキングピン
デポジットステーションBSWS-SR
サイズ50~100のデポジットステーションは、一体型伸縮取付により、コボットに過負荷をかけることなく操作することが可能です。サイズ125以上のデポジットステーションは伸縮取り付けなしで構成されます。
- 1
-
Maat 50 - 100
- 2
-
Maten 125 - 300
Grijpvingerwissel in 3 stappen
Na het voorpositioneren vindt de eigenlijke wissel plaats door naar het opslagstation te gaan. Tijdens het terugtrekken wordt het vergrendelingsmechanisme geactiveerd. Hierdoor blijft de grijpervinger in het opslagstation wanneer deze naar boven wordt uitgeschoven.
- 1
-
Herpositioneren
- 2
-
Moving into the deposit station and unlocking the basic jaw quick-change system BSWS-BR
- 3
-
Extending and depositing the workpiece-specific gripper finger
Inductive monitoring of the presence of the BSWS-R in the BSWS-SR
For monitoring the presence of the basic BSWS-BR in the deposit station BSWS-SR, it can be equipped with an inductive proximity switch.
RFID data carrier
The basic BSWS-BR is prepared for mounting an RFID data carrier. Mounting of an RFID data carrier according to DIN 69873 enables the coding of the workpiece-specific gripper fingers.
Toepassingsvoorbeeld
Toepassingsvoorbeeld
Grijpmodule met klauwsnelwisselsysstem voor het automatisch wisselen van werkstukspecifieke grijpervingers
- 1
-
Tweevinger-parallelgrijper PGN-plus-P
- 2
-
Snelwisselsysteem BSWS-R voor spanklauwen
- 3
-
Werkstukspecifieke grijpvingers
- 4
-
Depotstation