CELSIO CF SCAPTO C6 Ø8x120
Met hitte krimpende gereedschapshouder
IDnr. 1474556
CELSIO CF SCAPTO C6 Ø8x120, Gereedschapshouders
- Met hitte krimpende gereedschapshouder
- Reeksen: CELSIO
- Cool Flow-variant
- Scheidingvlak met de gereedschaphouder: SCHUNK CAPTO C6
- Klemdiameter: 8 mm
- Uitstekende lengte: 120 mm
- Uitloopnauwkeurigheid: ≤ 0,003 mm gemeten in het klemboorgat (volgens DIN 69882-8)
- Balanceergraad: G2.5 bij 25.000 tpm of Umax < 1 gmm
- Min. draaimoment: 50 Nm
Technische gegevens
| Technology | Heat shrinking toolholder |
|---|---|
| Series | CELSIO |
| Toolholder interface | SCHUNK CAPTO C6 |
| Toolholder standard | ISO 26623-1 |
| Clamping diameter D1 | 8 mm |
| D2 [mm] | 27.0 |
| D6 [mm] | 21.0 |
| Projecting length L1 [mm]/[inch] | 120 mm / 4.7" |
| L2 [mm] | 36.0 |
| L3 [mm] | 10.0 |
| L4 [mm] | 95.5 |
| G | M6 |
| Min. torque [Nm] | 50.0 |
| Weight [kg] | 1.2 |
| Cool Flow variant | yes |
These product variants are suitable for both milling as well as turning centers
Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Coolant supply
Cool Flow version
Coolant is fed via two coolant bore holes directly to the cutting edge of the tool
Length-setting screw
With adjustment screw for axial length adjustment
Balancing screw
With thread for balancing screws
Individual
Additional sizes and customized designs are available upon request