KSX-E 125-430 IOL
ID 1601446
Propiedades del producto:
- Sin sistema de mordazas
- Control mediante IO-Link
- Fuerza de sujeción programable de forma continua
- Carrera de sujeción programable de forma continua
- Posicionamiento previo de las mordazas
- Transferencia de medios neumática a la mordaza de sistema
- Interfaz IO-Link: Contactos de resorte
- Dimensiones: 125 x 492 x 150 mm
- Carrera de fijación básica: 120 mm
- Fuerza de sujeción*: 6 - 40 kN
- Unidad de control de la tensión de trabajo: 24 V DC
- Activador de la tensión de trabajo: 48 V DC
- Peso: 32 kg
Información técnica
Width of the clamping vise [mm] | 125.0 |
---|---|
Min. clamping force [kN] | 6.0 |
Max. clamping force [kN] | 40.0 |
Operating voltage control unit [V DC] | 24.0 |
Operating voltage actuator [V DC] | 48.0 |
Basic clamping stroke [mm] | 120.0 |
Weight [kg] | 32.0 |
Scope of delivery
Vise, operating manual; without system jaws, without fixed contact for integration into the machine control
Programmable clamping force
The clamping force can be continuously adjusted via the software in a range from 6 kN to 40 kN per chuck jaw.
Jaw pre-positioning and programmable clamping stroke
The jaws can be pre-positioned depending on the workpiece size so that the clamping stroke and clamping time can then be reduced to a minimum during automated loading processes.
Pneumatic media transfer into the system jaw
For workpiece contact control via dynamic pressure or cleaning of the clamping surfaces The system jaws must be prepared accordingly by the customer.
Clamping range
To cover the entire clamping range from 5 to 420 mm, the vise must be extended with the corresponding drawbar extension (see accessories).