Onze standaard centrische grijpers zijn leverbaar als grijpers voor kleine onderdelen, universele grijpers en afgedichte grijpers met drie vingers voor het veilig en nauwkeurig grijpen van buiten- en binnendiameters van werkstukken met een gewicht van slechts enkele grammen tot meer dan 100 kilo. Ze zijn geschikt voor gebruik bij een groot aantal toepassingen, van cleanrooms tot potentieel explosieve omgevingen, en van normale omgevingsomstandigheden tot toepassingen met hoge temperaturen. Dankzij de mogelijkheid om een grijper te combineren met sensorsystemen, productspecifieke grijpvingers of tussenliggende klemmen wordt de productiviteit verhoogd. Bovendien worden innovatieve ontwerpaanpassingen, zoals tandgeleiding, gecombineerd met de allernieuwste productietechnologie. Dit maakt de grijpers tot een robuuste, betrouwbare en daardoor veilige investering met een lange levensduur.
In the event of energy or pressure loss, seven variants secure the gripping force and/or the current position:
AS (spring closing)/IS (spring opening): A spring holds the gripper closed or open with minimum force. S (spring closing/opening): Depending on the design of the top jaws, the spring acts as a closing or opening mechanism. ASC (certified spring closing)/ISC (certified spring opening): The certified GripGuard gripping force maintenance ensures at least 80% gripping force in the closing or opening direction in the event of a pressure drop. M (permanent magnetic brake): Maintains the gripping force in the closing and opening direction. KP (position clamping): Fixes the current position in the closing and opening direction – via a brake or a pneumatic clamping element.
The ambient temperature describes the temperature of the air or the direct operating environment in which a gripper is operated (and not the workpiece temperature, as this is normally significantly higher than the ambient temperature). We also offer special solutions for ambient temperatures above 130 °C. We would be happy to review your use case based on your specific process data.
is calculated for force-fit clamping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. In the case of form-fit gripping, significatnly higher permissible workpiece weights are possible.
Example: - For the catalog-specified workpiece weight of 5 kg Gripping force of the gripper 1,000 N Coefficient of friction μ 0.1; safety factor 2; g 9.81
For supported control systems, we provide specific software resources (e.g., function blocks or parameter sets). This simplifies software commissioning and integration. Is your target system not listed? Please contact us!
Ondanks de hoge momentbelasting van de basisklemmen voldoet deze afgedichte centrische drievingergrijper aan de eisen van IP67. Hierdoor kunnen substanties uit de werkomgeving niet binnendringen in de component.