SLD 22-H-C-H
- Máx. derrame: 2558 mm
- Força máxima motriz: 1200 N
Technical details
| Sistema di azionamento | Azionamento lineare diretto |
|---|---|
| Corsa nominale max. H [mm] | 2558.0 |
| Forza motrice max. [N] | 1200.0 |
| Forza nominale [N] | 353.0 |
| Precisione di ripetibilità [mm] | 0.01 |
| Velocità max. [m/s] | 10.0 |
| Accelerazione max. [m/s²] | 100.0 |
| Corrente max. [A] | 56.0 |
| Corrente max. di arresto (corrente nominale) [A] | 15.1 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 40.0 |
| Peso slitta e motore [kg] | 13.0 |
| Peso piastre terminali [kg] | 3.2 |
| Massa aggiuntiva per 100 mm di corsa [kg] | 3.65 |
| Lunghezza X [mm] | 440.0 |
| Larghezza Y [mm] | 300.0 |
| Altezza Z [mm] | 136.0 |
| Forza Fy dyn [N] | 102000.0 |
| Forza Fz dyn [N] | 102000.0 |
| Coppia Mx dyn [Nm] | 9180.0 |
| Coppia My dyn [Nm] | 11169.0 |
| Coppia Mz dyn [Nm] | 11169.0 |
| Momento d'inerzia geometrico ly [mm⁴] | 2905000.0 |
| Momento d'inerzia geometrico lz [mm⁴] | 5.5779E7 |
| Attrito [N] | 50.0 |
| Classe di camera bianca ISO 14644-1 | 4 |
| Classe camera bianca ISO 14644-1 | 2015 |
| con copertura | Sì |
| Variante ad alta velocità | Sì |
Dimensions and maximum loads
Dimensions and maximum loads
The indicated torques and forces are static values, apply for each base jaw, and may occur simultaneously.
General notes about the series
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
How to get to the online configurator
The configurator is either linked on the SCHUNK website via the appropriate linear unit or can https://schunk.com/de/de/konfigurator-linearmodule called up directly.
Guidance
Rail guide
Drive
Linear direct drive based on a 3-phase, electronically commutated and permanently excited AC synchronous liner motor
Stroke measuring system
Non-contact measuring system with absolute and incremental versions; available with 1Vss, HIPERFACE®, HIPERFACE DSL®, DRIVE-CLiQ and EnDat 2.2 interfaces. Other interfaces are available on request.
Profile
Aluminum extruded profile with profiled rail guide
Slide
Aluminum slide, primary part and measuring system reading head directly integrated
Scope of delivery
Accessory kit with centering sleeves, safety information (product-specific instructions are available online)
Drive controller
Consultation on parameter settings for drive controllers from BOSCH (IndraDrive, IndraDrive CS) and Siemens (Sinamics S120). Provision of motor data sheets for other drive controllers. Commissioning support on request.
Warranty
24 months