EGN 80
IDnr. 306100
Alternatieve producten:
- Slag per klem: 8 mm
- Min. grijpkracht: 170 N
- Max. grijpkracht: 400 N
- Voeding: 24 V
- Max. totale stroom: 4 A
- Max. omgevingstemperatuur: 55 °C
Technische gegevens
| Carrera por mordaza [mm] | 8.0 |
|---|---|
| Fuerza de agarre mín. [N] | 170.0 |
| Fuerza de agarre máx. [N] | 400.0 |
| Peso recomendado de la pieza [kg] | 2.0 |
| Longitud máxima admisible de los dedos [mm] | 100.0 |
| Peso máx. admisible por dedo [kg] | 0.6 |
| Precisión de repetición [mm] | ± 0.01 |
| Presión de purga de aire mín. [bar] | 0.5 |
| Presión de purga de aire mín. / máx. [bar] | 1.0 |
| Tiempo de cierre [s] | 0.35 |
| Tiempo de apertura [s] | 0.35 |
| Velocidad máx. [mm/s] | 80.0 |
| Aceleración máx. [mm/s²] | 1500.0 |
| Peso [kg] | 0.84 |
| Temperatura ambiente mín. [°C] | 5.0 |
| Temperatura ambiente máx. [°C] | 55.0 |
| Clase de protección IP | 41 |
| Longitud X [mm] | 96.0 |
| Anchura Y [mm] | 42.0 |
| Altura Z [mm] | 141.9 |
| Corriente nominal [A] | 1.0 |
| Corriente máx. [A] | 4.0 |
| Sistema electrónico de control | externa |
| Tipo de controlador | ECM-EGN080 |
| Interfaz de comunicación | Véase la unidad de control ECM |
| Momento Mx máx. [Nm] | 60.0 |
| Momento My máx. [Nm] | 95.0 |
| Momento Mz máx. [Nm] | 55.0 |
| Máx. fuerza axial Fz máx. [N] | 1500.0 |
Dimensiones y cargas máximas
Maximum permitted finger projection
Fuerza de agarre
Velocidad
Máxima proyección permitida de los dedos
Dimensiones y cargas máximas
Las fuerzas y los momentos indicados son valores estáticos que se aplican por garra base y deben darse simultáneamente. Adicionalmente podrían producirse cargas en el momento generado por la fuerza de agarre.
Maximum permitted finger projection
Fuerza de agarre
- X-as:
- Punto P: longitud de los dedos
- Y-as:
- Fuerza de agarre
Velocidad
- X-as:
- Carrera
- Y-as:
- Velocidad
Máxima proyección permitida de los dedos
La curva se aplica a la versión con carrera 1. Para otras versiones, la curva debe desplazarse de forma paralela hasta alcanzar la longitud máxima admisible de los dedos.
- green
- Margen admisible
- grey
- Margen inadmisible
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
Closing and opening times
Minimum closing and opening times are merely the movement times of the base jaws or fingers at max. speed, max. acceleration, without current limitation (maximum current), and observance of the maximum permissible mass per finger.
Nominal currents
can be permanently actuated. With regard to all the currents which are ranging above the nominal current up to the maximum current, the notes of the individual product documentation has to be respected.
Operating principle
Wedge-hook kinematics
Housing material
Aluminum alloy, coated
Base jaw material
Steel
Actuation
servo-electric, via brushless DC servomotor and spindle drive
Warranty
24 months
Service life characteristics
on request
Scope of delivery
Gripper including safety information and accessory kit with centering sleeves for gripper and finger mounting. Product-specific instructions and software can be downloaded at schunk.com/downloads-manuals and schunk.com/downloads-software.