Er kon geen productdetailpagina worden gevonden voor dit serienummer. Als u vragen hebt over het product, kunt u het materiaalnummer opzoeken in het zoekveld of contact met ons opnemen.
Hoe kunnen we u helpen?
Uw verzoek aan SCHUNK
Verkoopmedewerkers op locatie vinden
Aanmelding voor de nieuwsbrief
CAD-gegevens opvragen
Uw offerteaanvraag
Wijzig het land om informatie te zien over de producten, diensten en contactpersonen die relevant zijn voor uw locatie.
Originele accessoires van SCHUNK verbeteren de veelzijdigheid en het toepassingsgebied van onze standaardmodules voor uw toepassing. De originele accessoires van SCHUNK waarborgen een optimale functionaliteit, betrouwbaarheid en nauwkeurige positionering. Geniet van de hoogste kwaliteit en een maximale levensduur.
The tool-free BSWS-M jaw quick-change system allows top jaws to be exchanged on the gripper manually and rapidly. Two adapter pins (= one BSWS-A set) and a base (BSWS-BM) are required for each gripper jaw. In case of reverse assembly and provided that no addional height is created, two adapter pins (= one BSWS-AR set) and an assembly kit (BSWS-URM) per gripper jaw are required. Another effect of the BSWS-URM is that there are no more problematic mounting holes in the finger contours.
The jaw quick-change system BSWS allows top jaws to be exchanged on the gripper manually and rapidly. One adapter pin (BSWS-A) and a base (BSWS-B) are required for each gripper jaw. In case of reverse assembly and provided that no additional height is created, one adapter pin (BSWS-AR) and an assembly kit (BSWS-UR) per gripper jaw are required. Another effect of the BSWS-UR is that there are no more disturbing mounting holes in the finger contours.
The automatic jaw quick-change system BSWS-R allows top jaws to be exchanged on the gripper automatically and rapidly. This increases the flexibility of the gripper with simultaneous unattended machine availability. The BSWS-R enables cost-efficient automatic change of workpiece-specific gripper fingers compared to changing the entire gripper.
Blanks made of aluminum or steel for rework by the customer Another effect is that there are no more disturbing fixing bores in the finger contours for jaw blanks with BSWS.
The finger blanks with jaw quick-change system allow fast and manual gripper finger changes. The mechanical interface to the gripper is already integrated. Only the specific workpiece geometry needs to be machined into the finger blank. Another effect is that there are no more disturbing fixing bores in the finger contours for jaw blanks with BSWS.
Standard fingers for external assembly of rings with the specified cord strength. Six fingers are required. Three form fingers and three rod fingers are required for internal assembly. Their geometry is based on the dimensions of the ring to be mounted. See the downloadable operating manual of the ORG for design rules. SCHUNK offers engineering design and production services on request.
Centering sleeves are used for centering between two elements. With SCHUNK grippers, this frequently occurs between the mounting plate and gripper and between the gripper and gripper fingers.
Standardized adapter plates for the mechatronic grippers EGU and EGK. Available for all common ISO flanges and specific robot models. Adaptation kits for single grippers and double grippers are available.
The HUE protective cover fully protects the gripper against external influences. The cover is suitable for applications of up to IP65 if an additional sealing of the cover bottom is provided. For detailed information, please see the HUE series. The connection diagram shifts by the height of the intermediate jaw.
In case of pressure failure, venting of the module will be prevented by the pressure maintenance valve. Therefore a temporary force or position maintenance can be implemented via different actuators. This is particularly suitable for grippers which cannot be equipped with a mechanical gripping force maintenance.
The SCHUNK EGM-JB distributor box allows several magnets to be connected to a magnetic controller quickly and easily in a centralized, bundled fashion.
Connection cables and connection cable kits for electrical connection to specific robot models and controllers. Depending on the manufacturer, a direct connection to the tool flange is possible or external cabling is required. In combination with mechanical adapters and software modules, this allows commissioning on the robot to be carried out in just a few steps.
Spare parts packages contain all required parts for repair and maintenance. There are three different spare parts kits for the gripper DPG-plus available: seal kit, lateral cover, and spring.
Spare parts packages contain all required parts for repair and maintenance. There are three different spare parts kits for the gripper DWG available: seal kit, piston rod, finger, and spring.
Spare parts kits contain all required parts for repair and maintenance. There are two different spare parts kits for the product EGS available: sensor bracket and swiveling stop.
Spare parts packages contain all required parts for repair and maintenance. There are four different spare parts kits for the GWB: seal kit, piston rod, finger, and spring.
Spare parts packages contain all required parts for repair and maintenance. There are two different spare parts lots for the gripper PFH available: cover and seal kit.
Spare parts packages contain all required parts for repair and maintenance. There are three different spare parts kits for the gripper PFH-mini available: cover, guide strip, and seal kit.
Spare parts packages contain all required parts for repair and maintenance. For the gripper PGL-plus-P there are the spare parts packages for the sealing kit and the sensor IOL.
Spare parts packages contain all required parts for repair and maintenance. There are three different spare parts kits for the gripper PGN available: spring, switching cam, and seal kit.
Spare parts kits contain all required parts for repair and maintenance. The sealing kit is available as a spare parts package for the PGN-plus-P gripper.
Spare parts packages contain all required parts for repair and maintenance. There are two different spare parts kits for the gripper PSH available: piston rod and seal kit.
Spare parts packages contain all required parts for repair and maintenance. There are five different spare parts kits for the gripper PWG available: spring, jaws, finger, piston rod, and seal kit.
