Co-act EGP-C
Funktion
Sectional diagram
Sectional diagram
The Co-act EGP-C gripper is electrically driven and has an integrated current limitation and collision protective cover. The current limitation ensures that the gripping force does not exceed a defined value. The collision protective cover serves for minimizing the risk of injury during the use in collaborative operations.
- 1
-
Collision protection
- 2
-
Gripper for small components EGP
- 3
-
Flange
with integrated electronics and cabling - 4
-
LED strip light
for status display - 5
-
Integrated sensor system
to monitor the jaw position - 6
-
Service flap sensor system
for adjusting the sensor system - 7
-
Service flap gripping force
for adjusting the gripping force
Observation of the gripping force in collaborative operation
Simple assembly of the Co-act EGP-C
Simple plug & work on several cobots
Co-act EGP-C pour Universal Robots
Observation of the gripping force in collaborative operation
The "gripping force" specification in the catalog refers to the arithmetic sum o the forces acting on each jaw individually at distance P (see illustration). For evaluation of the biomechanical limit values in accordance with ISO/TS 15066, only the gripping force acting on each gripper jaw must be used. Furthermore, the information in the operating manual is referred to.
- 1
-
Co-act EGP-C gripper
- 2
-
Gripper jaws (customized)
- 3
-
Gripping force applied to each gripper jaw
- 4
-
Workpiece
Simple assembly of the Co-act EGP-C
The Co-act EGP-C gripper was developed for simple assembly on collaborative robots (cobots). During assembly, the enclosed adapter plate has to be fastened with the supplied fastening material to the flange of the cobot. Subsequently, the gripper can be fastened with the enclosed hexagon socket wrench to the adapter flange. Finally, the electric connection (not version KETI) must be established.
- 1
-
Co-act EGP-C gripper
- 2
-
Hexagon socket wrench
- 3
-
Adapter flange
- 4
-
Mounting material
- 5
-
Flange of the cobot
Simple plug & work on several cobots
The standard Co-act gripper EGP-C is available for a wide range of collaborative robots (cobots) from a variety of manufacturers including KUKA, Universal Robots and FANUC. The gripper has been pre-configured in a way that it can be mounted directly electrically and mechanically onto the cobots. Depending on the manufacturer, different versions are also available depending on the flange version.
- 1
-
Co-act-EGP-C gripper to KUKA LBR iiwa
- 2
-
Co-act EGP-C gripper to FANUC CR-7iA
- 3
-
Co-act EGP-C grippers to UR
Co-act EGP-C pour Universal Robots
Pour les robots Universal Robots et Techman Robot, deux versions de la pince Co-act EGP-C sont disponibles. Les versions -URID ou -TMID utilisent le faisceau interne du robot pour transmettre les signaux vers le contrôleur du robot. Cependant, cette version n'a pas de bande lumineuse. Le bande lumineuse incluant son activation ne peut être utilisée que avec la version avec câble externe.
- 1
-
Co-act EGP-C sur UR utilisant le faisceau interne (version—URID)
- 2
-
Co-act EGP-C sur UR avec câblage externe (version—UREK)
Exemple d’application
Exemple d’application
Unité de préhension collaborative pour seconder l'opérateur lorsqu'il fait avancer et positionne des pièces à usiner.
- 1
-
Pince collaborative de petites pièces
Co-act EGP-C
