arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Wijzig het land om informatie te zien over de producten, diensten en contactpersonen die relevant zijn voor uw locatie.
WEL CF HSK-A 63 Ø10x120 图片仅供参考

WEL CF HSK-A 63 Ø10x120

侧固式刀柄

IDnr. 23003074

WEL CF HSK-A 63 Ø10x120, 刀柄
  • 侧固式刀柄
  • 系列: 侧固式
  • Cool Flow 版本
  • 刀具夹持接口: HSK-A 63
  • 夹持直径: 10 mm
  • 突出长度: 120 mm
  • 回转精度: 从锥体到 D1 测量 ≤ 0.003 mm
  • 平衡等级: 转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
标配范围: 含侧固式夹持螺钉和两个 M3 螺钉,用于封闭 Cool Flow 冷流选配项(按需求)
Technology WELDON end mill holders
Series WELDON
Toolholder interface HSK-A 63
Toolholder standard DIN ISO 12164-1
Clamping diameter D1 10 mm
D2 [mm] 35.0
D6 [mm] 41.0
Projecting length L1 [mm]/[inch] 120 mm / 4.7"
L2 [mm] 41.0
L4 [mm] 94.0
G1 M10
Weight [kg] 1.305
Cool Flow variant yes

Version
For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB

Run-out accuracy
≤ 0.003 mm measured from taper to D1

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Thread G1
G1 = thread for clamping screw

Data carriers
Bore holes for data carriers according to DIN 69873

Toolholder changes
For automatic toolholder changes

Coolant supply
Cool Flow version
Coolant is fed via two coolant bore holes directly to the cutting edge of the tool

Scope of delivery
Including WELDON clamping screw and two M3 screws for closing the Cool Flow option (if required)

Individual
Additional sizes and customized designs are available upon request