AGE-S-XYZ-160-0
N.º de identificação 324562
- Compensação XY: ± 10 mm
- Compensação Z: 14 mm
- Peso da peça: 60 kg
- Força Fz máx.: 800 N
- Força Fd máx.: 2000 N
Detalhes técnicos
| Compensação XY [mm] | ± 10 |
|---|---|
| Compensação Z [mm] | 14.0 |
| Peso de manuseio recomendado, vertical [kg] | 60.0 |
| Peso de manuseio recomendado, horizontal [kg] | 40.0 |
| Força de bloqueio [N] | 1800.0 |
| Força do pistão Z [N] | 1900.0 |
| Min. força da mola [N] | 640.0 |
| Pressão de operação mínima [bar] | 2.5 |
| Pressão máxima de operação [bar] | 8.0 |
| Pressão nominal de operação [bar] | 6.0 |
| Precisão de repetição [mm] | 0.1 |
| Conexão do lado do robô | ISO 9409-1-160-6-M10 |
| Conexão do lado da ferramenta | ISO 9409-1-160-6-M10 |
| Peso [kg] | 14.5 |
| Min. temperatura ambiente [°C] | 5.0 |
| Máx. temperatura ambiente [°C] | 60.0 |
| Comprimento X [mm] | 215.0 |
| Largura Y [mm] | 200.0 |
| Altura Z [mm] | 137.0 |
| Momento Mx máx. [Nm] | 200.0 |
| Momento My máx. [Nm] | 200.0 |
| Momento Mz máx. [Nm] | 100.0 |
| Força Fz máx. [N] | 800.0 |
| Força máxima Fd [N] | 2000.0 |
Dimensões e cargas máximas
Dimensões e cargas máximas
Este é o máximo. total de todos os momentos e cargas (forças e torques de aceleração, forças de processo etc.), que podem afetar uma unidade de compensação, a fim de garantir um funcionamento livre de erros.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Guidance system
robust linear guidances
Monitoring
XY locking and unlocking via a magnetic switch and Z-stroke via inductive proximity switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months