Módulos individuais NSE3
Principais Benefícios
機能 NSE3 138
機能 NSE3 138
- 1
-
コーンシール (オプション)
交換インターフェースの保護用 - 2
-
特許取得済みのデュアルストロークシステム
ピストンとクランピングスライダー間の、特許取得済みのデュアルストロークシステムにより、最大の引き込み力が保証されます。 - 3
-
ターボ機能
引き込み力の増幅 - 4
-
大きな接触面
引き込み力と保持力の伝達 - 5
-
完全にシールされたシステム
完全密閉のため、完璧にメンテナンスフリー - 6
-
大きなフラット面
最高の支持性能および剛性 - 7
-
クランプスライダーの「開」および「ロック」位置を監視
動圧を介して検出 - 8
-
加工中のインターフェースを保護するためのフラットシール
ワークやクランプパレットの配置の負担を軽減 - 9
-
ネジ取付け用のカバーキャップ
冷却材や切屑の堆積を防止 - 10
-
力のフロー内の滑り軸受け
最高の引き込み力と長寿命を実現 - 11
-
低位皿頭ネジ
フラット面の清掃が容易
比較：スプリングクランプとターボ機能の引き込み力
100% compatible with NSE plus generation
Exchangeability of the plug against a cone seal
Centering via short taper
Locking via clamping slides
Easy joining – more user-friendly
Integrated turbo function
Rolling friction between piston and clamping slide
Lower-lying countersunk screws
Controle do sistema de troca rápida de paletes
Mola de pressão em aço inoxidável
Feito de aço inoxidável – longa vida útil
Monitoramento da posição da corrediça de fixação através da pressão dinâmica – condição aberta
Monitoring of the clamping slide position via the dynamic pressure – locked condition
NSE3 138-V1 – the quick-change pallet module with integrated anti-twist protection V1
NSE-T3 138 – the tombstone module of the third generation
比較：スプリングクランプとターボ機能の引き込み力
ターボ機能使用時は、スプリング力クランプの引き込み力を、エアパルスのみで最大 3.5 倍までアップすることができます。
- 1
-
Betätigungskraft der Federkraftspannung
モジュールまたはクランピングステーションの圧縮空気の除去から派生 - 2
-
Betätigungskraft der Turbo-Funktion
Kurzer Luftimpuls in den Kolbenraum der Federn. - 3
-
Einzugskraft der Federkraftspannung
Beträgt max. 8 kN und resultiert lediglich aus der Federkraft nach Wegnahme der Druckluft. - 4
-
Einzugskraft mit Turbo-Funktion
Durch den Luftimpuls wird die Einzugskraft auf bis zu 28 kN beim NSE3 138 gesteigert. - 5
-
Y-axis
Zeigt den Faktor auf, um den die Einzugskraft erhöht wird. - 6
-
X-axis
Actuating pressure of the turbo function to show how the pull-down force is raised with increasing pressure.
100% compatible with NSE plus generation
The quick-change pallet modules of the NSE3 generation are 100% installation compatible with the NSE plus generation. Therefore all modules can be exchanged against each other 1:1.
Exchangeability of the plug against a cone seal
All quick-change pallet modules from the NSE3 generation are standard equipped for integrating a cone seal. The standard plug can easily be replaced by a cone seal at a later point.
Centering via short taper
The precise short taper centering combined with the form-fit and self-retaining locking characterizes the SCHUNK quick-change pallet system.
Locking via clamping slides
Large contact surfaces between clamping slides and clamping pin ensure a low surface pressure, resulting in a long service life.
Easy joining – more user-friendly
Insertion radii on the clamping pin enable quick and safe joining even at a tilt angle and in case of eccentricity.
Benefit: More user friendly for manual and automatic loading.
Integrated turbo function
In order to increase the pull-down force, the quick-change pallet module is additionally actuated with compressed air. Compared to the pure clamping force achived via spring force, the turbo function influences the pull-down force by a factor 3.5 (max. 28,000 N). By using the active turbo function, achieving higher cutting parameters during the machining process is possible.
- 1
-
Spring force
Stainless, fatigue-resistant pressure springs. - 2
-
Additional force
Resulting from the turbo function.
Rolling friction between piston and clamping slide
In order to further increase the pull-down force, plain bearing bushings are integrated in the piston for bearing the cylinder pin. Therefore the efficiency is increased and wear minimizes at the same time.
Lower-lying countersunk screws
Countersunk screws are used in the lower-lying flat surface, allowing an easy cleaning of the flat surface.
Controle do sistema de troca rápida de paletes
Os módulos são acionados através de conexões de ar laterais ou inferiores.
Benefício: O módulo é versátil na instalação.
Mola de pressão em aço inoxidável
Para máxima vida útil, todas as molas de atuação são feitas de aço inoxidável resistente à fadiga.
Feito de aço inoxidável – longa vida útil
Todos os componentes funcionais são feitos de aço inoxidável endurecido.
Monitoramento da posição da corrediça de fixação através da pressão dinâmica – condição aberta
- 1
-
Exaustão
O ar comprimido pode escapar porque a corrediça de fixação não está posicionada acima do furo. - 2
-
Dynamic pressure
O ar comprimido não pode escapar porque a corrediça de fixação está acima do furo.
Monitoring of the clamping slide position via the dynamic pressure – locked condition
- 1
-
Dynamic pressure
The compressed air cannot escape because the clamping slide is above the bore hole. - 2
-
Deaeration
The compressed air can escape because the clamping slide is not positioned above the bore hole.
NSE3 138-V1 – the quick-change pallet module with integrated anti-twist protection V1
The single module NSE3 138-V1 of the new generation is also a modified version, and offers the same benefits as the NSE3 138 for the use of single pallets.
NSE-T3 138 – the tombstone module of the third generation
The tombstone module NSE-T3 138 is also a module of the new generation. With this extremely rigid module it achieves higher machining parameters.
Advantage: Higher pull-down forces optional use of a seal ring, and longer service life.
