LM 300-H350-ASP
ID 314497
- Corsa max.: 350 mm
Détails techniques
| Corsa [mm] | 350.0 |
|---|---|
| Forza di estrazione [N] | 753.0 |
| Forza di rientro [N] | 633.0 |
| Precisione di ripetibilità [mm] | 0.02 |
| Diametro del pistone [mm] | 40.0 |
| Diametro della barra [mm] | 16.0 |
| Pressione d'esercizio min. [bar] | 3.0 |
| Pressione di esercizio max. [bar] | 8.0 |
| Pressione d'esercizio nominale [bar] | 6.0 |
| Volume del cilindro/10 mm per corsa doppia [cm³] | 12.57 |
| Lunghezza complessiva [mm] | 824.0 |
| Classe di protezione IP | 40 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 60.0 |
| Classe di camera bianca ISO 14644-1 | 6 |
| Classe camera bianca ISO 14644-1 | 1999 |
| Peso [kg] | 13.11 |
| Sistema di azionamento | Cilindro con stelo |
| Lunghezza X [mm] | 824.0 |
| Larghezza Y [mm] | 90.0 |
| Altezza Z [mm] | 85.0 |
| Coppia Mx max [Nm] | 202.0 |
| Coppia My max. [Nm] | 225.0 |
| Coppia Mz max [Nm] | 112.5 |
| Distanza N (per carico di coppia) [mm] | 64.5 |
| Forza assiale max. Fz max. [N] | 2130.0 |
| Versione con freno di arresto | Sì |
Dimensioni e carichi massimi
Dimensioni e carichi massimi
Le forze e le coppie indicate si riferiscono ai valori massimi in caso di sollecitazione singola. Se entrano in gioco contemporaneamente più forze e/o coppie, il tipo di applicazione può essere calcolato con il TOOLBOX. La forza Fy si può calcolare solo mediante il Toolbox.
General notes about the series
Repeat accuracy
is defined as a distribution of the end positions for 100 consecutive cycles.
Travel times
are pure movement times of the slide or the base body. Valve switching times, hose filling times, or PLC reaction times are not a part of this and are to be considered when cycle times are calculated.
Stroke
is the maximum nominal stroke of the unit. It can be shortened on both sides by the shock absorbers.
Layout or control calculation
For configuration or control calculation of the units, we recommend to use our Toolbox software, which is available online. Verifying the sizing of the selected unit is absolutely necessary, as otherwise overloading may occur.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Housing material
Aluminum alloy, anodized
Guidance
Backlash-free, pre-loaded cross roller guide
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Scope of delivery
Shock absorber and driver for proximity switch
Warranty
24 months
Service life characteristics
on request