PZN-plus 160-2
ID 303414
- Stroke per jaw: 8 mm
- Closing force: 11000 N
- Opening force: 11750 N
- Max. ambient temperature: 90 °C
Technické údaje
| Carrera por mordaza [mm] | 8.0 |
|---|---|
| Fuerza de cierre [N] | 11000.0 |
| Fuerza de apertura [N] | 11750.0 |
| Fuerza de cierre (con longitud de los dedos de 0 mm) [N] | 12857.0 |
| Fuerza de apertura (con longitud de los dedos de 0 mm) [N] | 13722.0 |
| Peso [kg] | 5.6 |
| Peso recomendado de la pieza [kg] | 55.0 |
| Volumen del cilindro por carrera doble [cm³] | 520.0 |
| Presión de trabajo mín. [bar] | 2.0 |
| Presión de trabajo máx. [bar] | 8.0 |
| Presión nominal de servicio [bar] | 6.0 |
| Presión de purga de aire mín. [bar] | 0.5 |
| Presión de purga de aire mín. / máx. [bar] | 1.0 |
| Tiempo de cierre [s] | 0.5 |
| Tiempo de apertura [s] | 0.5 |
| Longitud máxima admisible de los dedos [mm] | 210.0 |
| Peso máx. admisible por dedo [kg] | 3.5 |
| Schutzart IP | 40 |
| Min. Umgebungstemperatur [°C] | 5.0 |
| Max. Umgebungstemperatur [°C] | 90.0 |
| Wiederholgenauigkeit [mm] | 0.02 |
| Reinraumklasse ISO 14644-1 | 5 |
| Durchmesser D [mm] | 190.0 |
| Höhe Z [mm] | 81.0 |
| Moment Mx max. [Nm] | 170.0 |
| Moment My max. [Nm] | 180.0 |
| Moment Mz max. [Nm] | 130.0 |
| Max. Kraft axial Fz max. [N] | 4300.0 |
Dimensions and maximum loads
Gripping force O.D. gripping
Gripping force I.D. gripping
Dimensions and maximum loads
The indicated moments and forces are statical values, apply for each base jaw and may appear simultaneously. Loads may additionally occur to the moment produced by the gripping force itself.
Gripping force O.D. gripping
- Osa X:
- Point P - Finger length
- Osa Y:
- Gripping force
Gripping force I.D. gripping
- Osa X:
- Point P - Finger length
- Osa Y:
- Gripping force
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Finger length
is measured from the reference surface as the distance P in direction to the main axis. The maximum permissible finger length applies until the nominal operating pressure is achieved. With higher pressures, the finger length must be reduced proportionally to the nominal operating pressure.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
Closing and opening times
are movement times of the base jaws only, without application-specific gripper fingers. Valve switching times, hose fill times, or PLC reaction times are not included, and are to be considered when cycle times are calculated.
Cleanroom class ISO 14644-1:1999
5
作動方式
ウェッジフックの動的性能
ハウジングの材質
特殊ハードコート処理されたアルミ合金
ベースジョーの材質
鋼鉄
作動
空圧式、フィルターを通した圧縮空気、ISO 8573-1:2010 [7:4:4] に準拠。
保証
36 カ月
寿命特性
ご要望によって
納品内容
注文仕様のグリッパー、アクセサリーキット(芯出しスリーブ、直接接続用Oリング／詳細内容は取扱説明書を参照)、安全に関する情報。製品固有の説明書は、schunk.com/downloads-manualsからダウンロードいただけます。
把持力の維持
把持力の機械式保持バージョンまたは圧力保持バルブ SDV-P 付きのバージョンを使用することで可能です。