EGU 50-IL-N-B
ID 1491533
- Zdvih na čelist: 51 mm
- Min. uchopovací síla: 150 N
- Max. uchopovací síla: 300 N
- Napájení: 24 V
- Max. okolní teplota: 55 °C
Technické údaje
| Zdvih na čelist [mm] | 51.0 |
|---|---|
| Min. uchopovací síla [N] | 150.0 |
| Max. uchopovací síla [N] | 300.0 |
| Max. přípustná délka prstu [mm] | 80.0 |
| Max. přípustná hmotnost jednoho prstu [kg] | 0.4 |
| Opakovatelná přesnost (uchopování) [mm] | 0.02 |
| Opakovatelná přesnost (polohování, všesměrové) [mm] | 0.05 |
| Opakovatelná přesnost (polohování, obousměrné) [mm] | 0.15 |
| Doba zavření [s] | 0.8 |
| Doba otevření [s] | 0.8 |
| Max. rychlost (polohování) [mm/s] | 110.0 |
| Max. zrychlení [mm/s²] | 800.0 |
| Vlastní hmotnost [kg] | 1.44 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 55.0 |
| Třída ochrany IP, elektronika | 67 |
| Třída krytí IP, vedení/základní čelisti | 40 |
| Třída čistého prostoru ISO 14644-1:2015 | 5 |
| Délka X [mm] | 122.0 |
| Šířka Y [mm] | 72.0 |
| Výška Z [mm] | 88.0 |
| Jmenovité napětí [V] | 24.0 |
| Komunikační rozhraní | IO-Link |
| Jmenovitý příkon, BasicGrip [A] | 0.24 |
| Max. příkon, BasicGrip [A] | 1.23 |
| Logická jmenovitá spotřeba proudu. [A] | 0.16 |
| Logická maximální spotřeba proudu. [A] | 0.2 |
| Max. moment Mx [Nm] | 32.0 |
| Max. moment My [Nm] | 35.0 |
| Max. moment Mz [Nm] | 32.0 |
| Max. axiální síla Fz max. [N] | 800.0 |
Dimensions and maximum loads
Maximum permitted finger projection
Verze s udržováním uchopovací síly
Verze bez udržování uchopovací síly
Maximální přípustný přesah
Dimensions and maximum loads
The indicated moments and forces are statical values, apply for each base jaw and may appear simultaneously. Loads may additionally occur to the moment produced by the gripping force itself.
Maximum permitted finger projection
Verze s udržováním uchopovací síly
- Osa X:
- Délka prstu
- Osa Y:
- Uchopovací síla
Verze bez udržování uchopovací síly
- Osa X:
- Délka prstu
- Osa Y:
- Uchopovací síla
Maximální přípustný přesah
Lmax je ekvivalent maximální přípustné délky prstu, viz tabulka technických údajů.
- green
- Permitted range
- grey
- Inadmissible range
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Repeat accuracy (gripping)
defined as the spread of the actual position during 100 consecutive closing or opening movements on a rigid workpiece or a fixed workpiece stop under constant conditions.
Repeat accuracy (positioning, unidirectional)
defined as the spread of the actual position per base jaw during 100 consecutive movements to a target position from the same direction under constant conditions.
Repeat accuracy (positioning, bi-directional)
defined as the distribution of the actual position per base jaw during 100 consecutive movements to a target position from both directions under constant conditions.
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Closing and opening times (positioning)
Closing and opening times are only the movement times of the fingers at max. speed, as well as max. acceleration with observance of the max. permissible mass per finger and refer to the traverse path per jaw and 50% of the nominal stroke.
Max. speed (positioning) and max. acceleration
is the arithmetic sum of the velocity and acceleration acting on each jaw.
Housing material
Aluminum alloy, anodized
Base jaw material
Steel, corrosion-protected
Warranty
24 months or 5 million cycles BasicGrip / 3 million cycles StrongGrip (one cycle consists of a complete gripping process: "Open gripper" and "Close gripper")
Scope of delivery
Gripper including safety information and accessory kit with centering sleeves for gripper and finger mounting. Product-specific instructions and software can be downloaded at schunk.com/downloads-manuals and schunk.com/downloads-software.