EMH
Magnetische grijper
Elektro-permanente magneetgrijper voor energie-efficiënte handling van ferromagnetische werkstukken met geïntegreerde elektronica en feedbackfunctie
Beschrijving
Innovaties - uw voordelen
- Hoge houdkrachten in de kleinste ruimte
voor een betrouwbare handling van onderdelen bij compacte machines - Geïntegreerde elektronica
Compact ontwerp, omdat er geen extra besturing nodig is - Laag gewicht
voor hoge dynamica bij moeilijke toepassingen - Betrouwbare houdkrachtbeveiliging
om ook in situaties met een noodstop een procesveilige werking te waarborgen - De grijpkracht kan in vier stappen worden aangepast
zorgt ervoor dat verschillende werkstukken kunnen worden gegrepen (Alleen RP- en MP-variant ) - Besturing via 24 V-voeding
bespaart energie en vereenvoudigt de aansluiting en bedrading - Werkstuk toegankelijk vanaf vijf zijden en vrij van interferentiecontouren
door onnodige grijpvingers - Reactie op magnetisatoestatus en aanwezigheid van werkstukken
bespaart tijd en vereenvoudigt het programmeren - Varianten voor speciale vereisten:
EMH-MP en EMH-DP
Options and special information
- Pole extension
The use of pole extensions alters the magnetic flux and can affect the holding force if incorrectly designed. Pole extensions also affect component detection. Workpieces may no longer be detected. - Heating
Each activation increases the internal temperature of the product. Overheating reduces the magnetic characteristics and can destroy the product. The number of activations per minute must be adjusted so that the maximum permissible product temperature is not reached. - Material dependence
The product is designed to hold almost all ferromagnetic materials. The achievable holding force depends, among other things, on the respective workpiece material. Accordingly, with some ferromagnetic materials a reduction in the nominal holding force can be expected. - Material efficiency
Conventional steel (Fe 360) 100%, ferromagnetic crude steel (10-C15) 90%, tool, case-hardened and sectional steels 70 - 80%, magnetic stainless steel 65%, cast iron 50% - Magnetic field evaluation
Due to occupational safety and the danger from electromagnetic fields, the EMH was subjected to a magnetic field evaluation. For more information, please contact us.