arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Cambie la selección del país para ver la información sobre los productos, servicios y personas de contacto relevantes para su ubicación.
B 180-SSS-M-3220 Similar a la imagen

B 180-SSS-M-3220

Módulo lineal universal
Módulo lineal universal Beta, Tamaño: 180, eléctrico, Husillo de accionamiento, Riel guía

  • Carrera máx.: 5030 mm
  • Fuerza de accionamiento máx.: 12000 N
Carrera máx. H [mm] 5030.0
Fuerza de accionamiento máx. [N] 12000.0
Precisión de repetición [mm] ± 0.03
Longitud total máx. [mm] 5600.0
Velocidad máx. [m/s] 1.0
Aceleración máx. [m/s²] 20.0
Temperatura ambiente mín. [°C] 0.0
Temperatura ambiente máx. [°C] 80.0
Peso neto de la base (carro incluido) [kg] 33.5
Peso adicional por carrera de 100 mm [kg] 2.8
Peso de la corredera [kg] 10.8
Longitud de la placa del carro [mm] 380.0
Sistema de guía Riel guía
Número de guías 2.0
Tamaño de las guías 20
Concepto de accionamiento Husillo de accionamiento
Par de giro en marcha en vacío [Nm] 2.5
Momento de inercia [kgm²] 6.39E-4
Diámetro del husillo [mm] 32.0
Paso de husillo [mm] 20
Velocidad máx. del husillo [1/min] 3000.0
Longitud X [mm] 570.0
Anchura Y [mm] 180.0
Altura Z [mm] 155.0
Momento Mx máx. [Nm] 1500.0
Moment My max. [Nm] 3000.0
Moment Mz max. [Nm] 1500.0
Force Fy max. [N] 6000.0
Force Fz max. [N] 12000.0
Force -Fz max. [N] 6000.0
Please note that the long slide plates and the use of spindle supports (SA) reduce the maximum stroke H.
SCHUNK standard spindle supports with noise damping (SAG) reduce the maximum stroke by 10 mm for every 2 SAG.
Please note that the moment of inertia for spindle axes refers to one meter.

General notes about the series

Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.

Max. stroke
is the maximum permissible stroke. Acceleration and braking distances or possible overrun must be taken into consideration.

Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.

Acceleration and speed
The values specified are the maximum values of the units without loading. The actual accelerations and speeds for your application must be designed separately and can deviate from the maximum values.

Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.

Operating principle
Choice of toothed belt or ball screw spindle drive

Drive
servomotors of different providers can be trouble-free adapted

Profile
Extruded aluminum profile with plastic cover strip

Slide
Aluminum slide with a brush seal

Scope of delivery
Assembly and operating manual with declaration of incorporation

Warranty
24 months