WEL S SK 40 Ø12x100
WELDON upínače pre stopkové frézy
ID 23004020
WEL S SK 40 Ø12x100, Upínače nástrojov
- WELDON upínače pre stopkové frézy
- Konštrukčný rad: WELDON Slim
- Rozhranie upínača nástrojov: SK 40
- Upínací priemer: 12 mm
- Vyčnievajúca dĺžka: 100 mm
- Presnosť hádzania: ≤ 0,003 mm merané od kužeľa po D1
- Kvalita vyváženia: G6,3 pri 8 000 ot./min alebo Umax < 1 gmm
Technical details
| Technology | WELDON end mill holders |
|---|---|
| Series | WELDON Slim |
| Toolholder interface | SK 40 |
| Toolholder standard | DIN ISO 7388-1 AD/AF |
| Clamping diameter D1 | 12 mm |
| D2 [mm] | 29.0 |
| D6 [mm] | 17.0 |
| Projecting length L1 [mm]/[inch] | 100 mm / 3.9" |
| L2 [mm] | 45.5 |
| L4 [mm] | 80.9 |
| G | M10x1 |
| G1 | M6 |
| Weight [kg] | 1.155 |
| Coolant-proof | yes |
Version
For clamping tools with cylindrical shanks as per DIN 1835B/6359HB and DIN 1835E/6359HE
Run-out accuracy
≤ 0.003 mm measured from taper to D1
Balancing grade
G6.3 at 8,000 RPM or Umax < 1 gmm
Thread G1
G1 = thread for clamping screw
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 AD/AF
Bores for form AF are sealed for transport
Scope of delivery
Including WELDON clamping screw
Individual
Additional sizes and customized designs are available upon request