KOM SK 40 Ø27x55
面铣刀适配器
ID 263624
KOM SK 40 Ø27x55, 刀柄
- 面铣刀适配器
- 系列: 面铣刀适配器
- 刀具夹持接口: SK 40
- 夹持直径: 27 mm
- 夹持直径的螺纹: M12
- 突出长度: 55 mm
- 回转精度: 从锥体到 D1 测量 ≤ 0.006 mm
- 平衡等级: 转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
Détails techniques
| Technologie | Kombi-Fräser-Aufsteckdorne |
|---|---|
| Baureihe | Kombi-Fräser-Aufsteckdorne |
| Werkzeughalterschnittstelle | SK 40 |
| Werkzeughalternorm | DIN ISO 7388-1 AD/AF |
| Spanndurchmesser D1 | 27 mm |
| Gewinde Anzugsschraube G | M12 |
| D2 [mm] | 48.0 |
| Auskraglänge L1 [mm] / [inch] | 55 mm / 2.2" |
| L4 [mm] | 35.9 |
| L11 [mm] | 33.0 |
| L12 [mm] | 21.0 |
| Gewicht [kg] | 1.44 |
| Kühlmitteldicht | ja |
| Standardlänge | ja |
Version
For mounting cutters with longitudinal or crosswise slot
Run-out accuracy
≤ 0.006 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 AD/AF
Bores for form AF are sealed for transport
Scope of delivery
Includes tightening bolt, drive ring, and feather key
Individual
Additional sizes and customized designs are available upon request