설명
SCHUNK 고객이 얻는 혜택
- 소형 디자인
전자 장치를 내장한 공간 절약형 셋-업 - 2개 보정 이용 가능
웹 인터페이스로 2개의 측정 범위 제어 가능 - 플러그 앤 워크
소프트웨어 모듈을 통해서 KUKA 및 Universal Robots와 직접 호환 - 높은 정밀도 및 비용 절감
최적화된 제조 - 튼튼한 디자인
높은 오버로드 범위로 단기 오버로드에서도 피해 보호 보장 - LED 디스플레이가 있는 버전
컨트롤러를 통한 평가 없이 센서의 상태 표시
Options and special information
- 6-axis force/torque sensor
Strain gauges (DMS) measure the strain applied in all six degrees of freedom (Fx, Fy, Fz, Mx, My and Mz). The signals from the DMS are directly processed in the sensor, and are made available as forces and moments via various communication protocols. - Sensor cable
The sensor cable connects the sensor to the control line via an M8 connector or an M12 connector through an 8-pin M12 connector. The voltage supply and communication line are integrated into the sensor cable and shielded. The highly flexible sensor line protects the sensor signals against electrical fields and mechanical loads. - Control line
The control line is a Y-distribution cable and is connected to the sensor line via an M12 socket. It supplies the sensor with voltage via a 3-pin open wire strand and allows separate communication with the sensor via EtherNet or EtherCAT via an RJ-45 connector, depending on the version.