Co-act EGP-C 40-N-N-GoFa
ID 1468548
- Corsa per griffa: 6 mm
- Forza di presa minima: 35 N
- Forza di presa massima: 140 N
- Alimentazione elettrica: 24 V DC
- Corrente max. totale: 2 A
- Temperatura ambiente max.: 55 °C
技術的詳細
| Robot compatibile | ABB GoFa (CRB 15000) |
|---|---|
| Flangia per robot | Flangia standard |
| Sensori integrati | sì, induttivo in due direzioni |
| Lunghezza X [mm] | 93.8 |
| Larghezza Y [mm] | 90.2 |
| Altezza Z [mm] | 123.0 |
| Corsa per griffa [mm] | 6.0 |
| Forza di presa minima [N] | 35.0 |
| Forza di presa massima [N] | 140.0 |
| Forza min. per ganascia [N] | 17.5 |
| Forza max. per ganascia [N] | 70.0 |
| Peso del pezzo raccomandato [kg] | 0.7 |
| Lunghezza griffe max. consentita [mm] | 50.0 |
| Peso max. consentito per griffa [kg] | 0.08 |
| Precisione di ripetibilità [mm] | 0.02 |
| Tempo di chiusura [s] | 0.2 |
| Tempo di apertura [s] | 0.2 |
| Peso [kg] | 0.62 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 55.0 |
| Classe di protezione IP | 30 |
| Spina del cavo/parte terminale del cavo | 2 x M8 |
| Lunghezza del cavo L1 [mm] | 70.0 |
| Lunghezza del cavo L2 [mm] | 175.0 |
| Tensione nominale [V DC] | 24.0 |
| Corrente nominale [A] | 0.2 |
| Corrente max. [A] | 2.0 |
| Elettronica del controllo | integrata |
| Interfaccia di comunicazione | I/O digitale |
| Numero di ingressi digitali | 4.0 |
| Numero di uscite digitali | 2.0 |
| Coppia Mx max [Nm] | 1.5 |
| Coppia My max. [Nm] | 2.0 |
| Coppia Mz max [Nm] | 4.0 |
| Forza assiale max. Fz max. [N] | 170.0 |
Dimensioni e carichi massimi
Sporgenza max. consentita
Forza di presa
Sporgenza max. consentita
Dimensioni e carichi massimi
Le coppie e le forze indicate sono valori statici, valgono per ciascuna ganascia base e possono subentrare contemporaneamente. I carichi possono aggiungersi alla coppia generata dalla stessa forza di presa.
Sporgenza max. consentita
Forza di presa
- X 軸:
- Lunghezza delle dita
- Y 軸:
- Forza di presa
Sporgenza max. consentita
Lmax corrisponde alla lunghezza massima consentita delle griffe, vedi la tabella dati tecnici
- green
- Campo ammissibile
- grey
- Campo non ammissibile
General notes about the series
Gripping force
is the arithmetic total of the gripping force applied to each gripper jaw at distance P (see illustration). For more information, see the detailed functional description.
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights. For more information, see sssembly and operating manual.
Closing and opening times
are movement times of the base jaws only, without application-specific gripper fingers. PLC reaction times are not included in the above-mentioned times and must be taken into consideration when determining cycle times.
Operating principle
Rack and pinion principle
Housing material
Polyamide with glass fiber additive
Base jaw material
Steel
Actuation
servo-electric, via brushless DC servomotor
Warranty
see assembly and operating manual
Service life characteristics
on request
Scope of delivery
Accessory pack with adapter flange, mounting material and hexagon socket wrench, assembly and operating manual with declaration of conformity and incorporation, safety information