ELP 025-H080
ID 315716
- 最大ストローク: 80 mm
- 最大駆動力: 17 N
技術的詳細
| 駆動方式 | リニアダイレクトドライブ |
|---|---|
| 最大ストローク [mm] | 80.0 |
| 公称駆動力 [N] | 17.0 |
| 最大有効荷重 (水平) [kg] | 1.0 |
| 最大有効荷重 (垂直) [kg] | 0.75 |
| 繰り返し精度 [mm] | ± 0.01 |
| 自重、スライダー含む [kg] | 2.0 |
| スライダーの重量 [kg] | 0.34 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 55.0 |
| IP 保護等級 | 20 |
| クリーンルーム等級 ISO 14644-1:2015 | 5 |
| 騒音発生 [dB(A)] | 52 |
| クリアランス N (トルク負荷の場合) [mm] | 139.0 |
| 長さ X [mm] | 246.0 |
| 幅 Y [mm] | 60.0 |
| 高さ Z [mm] | 56.0 |
| 公称電圧 [V] | 24.0 |
| 定格電流 [A] | 0.64 |
| 最大電流 [A] | 2.0 |
| 電子コントローラー | 内蔵 |
| 通信インターフェース | デジタル入力 |
| デジタル入力端子数 | 2.0 |
| 定格電流ロジック [A] | 0.04 |
| モーメント Mx 最大 [Nm] | 9.0 |
| トルク My 最大 [Nm] | 16.0 |
| モーメント Mz最大 [Nm] | 16.0 |
| 力 Fy 最大 [N] | 1140.0 |
| 力 Fz 最大 [N] | 1140.0 |
| 力 -Fz max. [N] | 1140.0 |
寸法と最大荷重
移動時間、水平
寸法と最大荷重
ここに示す荷重と負荷トルクは、それぞれの負荷の最大値です。複数個の力またはトルクが同時に加わる場合は、その各々に対する許容最大値はこれより小さくなります。
移動時間、水平
- X 軸:
- 速度レベル
- Y 軸:
- ストローク時間
General notes about the series
Stroke
is the maximum nominal stroke of the unit. It can be reduced on both sides by end stops.
Repeat accuracy
is defined as a distribution of the end positions for 100 consecutive cycles.
Travel times
are pure movement times of the slide. PLC reaction times are not included and have to be considered when the cycle times are determined.
Payload
is the weight of the total weight which is attached to the cantilever arm. Please consider that service life will shorten if the maximum payload is exceeded. SCHUNK cannot assume any warranty for this.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Housing material
Aluminum alloy, coated
Guidance
Backlash-free, pre-loaded roller guides
Drive
Linear direct drive
Scope of delivery
Accessory kit with centering sleeves, safety information (product-specific instructions are available online)
Warranty
24 months
Service life characteristics
on request