EGL 90-PN
ID 1302877
代替製品：
- 片側ストローク: 42.5 mm
- 最小把持力: 50 N
- 最大把持力: 600 N
- 電源: 24 V
- 最高周囲温度: 55 °C
技術的詳細
| Course par mors [mm] | 42.5 |
|---|---|
| Force de préhension min. [N] | 50.0 |
| Force de préhension max. [N] | 600.0 |
| Poids de pièce recommandé [kg] | 3.0 |
| Longueur de doigt max. admissible [mm] | 165.0 |
| Poids de doigt max. admissible [kg] | 0.5 |
| Répétabilité [mm] | 0.05 |
| Temps de fermeture [s] | 0.7 |
| Temps d'ouverture [s] | 0.7 |
| Vitesse de rotation max. [mm/s] | 150.0 |
| Accélération max. [mm/s²] | 2500.0 |
| Poids [kg] | 1.8 |
| Température ambiante mini. [°C] | 5.0 |
| Température ambiant maxi. [°C] | 55.0 |
| Indice de protection IP | 46 |
| Catégorie salle blanche ISO 14644-1:2015 | 4 |
| Longueur X [mm] | 112.0 |
| Largeur Y [mm] | 90.0 |
| Hauteur Z [mm] | 108.0 |
| Electronique de commande | intégré(e) |
| Tension nominale [V] | 24.0 |
| Interface de communication | PROFINET |
| Interface de paramétrage | USB |
| Puissance actuelle max. [A] | 2.5 |
| Courant de commande max. [A] | 0.5 |
| Moment Mx max. [Nm] | 20.0 |
| Moment My max. [Nm] | 20.0 |
| Moment Mz max. [Nm] | 20.0 |
| Force axiale max. Fz max. [N] | 400.0 |
Dimensions et charges max.
Dépassement maximum autorisé
Force de préhension
Longueur des doigts
Dépassement maximum autorisé
Déclassement
Dimensions et charges max.
Les moments et les forces indiqués correspondent à des valeurs statiques et s'appliquent à chacun des mors de base et peuvent survenir simultanément. Ils peuvent s’ajouter au moment produit par la force de préhension elle-même.
Dépassement maximum autorisé
Force de préhension
- X 軸:
- Courant moteur
- Y 軸:
- Force de préhension
Longueur des doigts
- X 軸:
- Vitesse des doigts
- Y 軸:
- Longueur des doigts
Dépassement maximum autorisé
- grey
- Plage non admissible
Déclassement
Le schéma d'étranglement indique le courant moteur maximal admissible selon la température ambiante.
- X 軸:
- Température ambiante
- Y 軸:
- Courant moteur
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
Closing and opening times
Minimum closing and opening times are merely the movement times of the base jaws or fingers at max. speed, max. acceleration, without current limitation (maximum current), and observance of the maximum permissible mass per finger.
Nominal currents
can be permanently actuated. With regard to all the currents which are ranging above the nominal current up to the maximum current, the notes of the individual product documentation has to be respected.
Electrical brake
The built-in, electric holding break is used for fixing and holding the position of the gripper jaws in the event of a power failure. It cannot cover all of the security or gripping force maintenance functions.
Operating principle
Rack and pinion principle
Housing material
Aluminum alloy, coated
Base jaw material
42CrMo4+QT
Actuation
servo-electric, via brushless DC servomotor
Warranty
24 months
Scope of delivery
Gripper including safety information and accessory kit with centering sleeves for gripper and finger mounting. Product-specific instructions and software can be downloaded at schunk.com/downloads-manuals and schunk.com/downloads-software.