arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
更改地区选项,查看您所在区域可供应的产品、服务和联系人的相关信息。
SRU-plus-D 20-W-90-3-4-AS 類似のイラスト

SRU-plus-D 20-W-90-3-4-AS

汎用旋回ユニット

ID 37361402

汎用旋回ユニット SRU-plus-D, サイズ: 20, 空圧式, 空圧フィードスルー, 回転角度: 90 °, 停止位置調節範囲: 3 °, ミドル位置、中央位置: なし, エンド位置ダンパー: スプリング-エラストマー, 流体フィードスルー付き

  • フルードフィードスルーの数: 4
  • トルク: 3 Nm
Smorzamento nella posizione finale Molle in elastomero
Angolo di rotazione [°] 90
Possibilità di regolazione delle posizioni finali [°] 3
Coppia [Nm] 3.0
Numero delle posizioni centrali Nessuno
Classe di protezione IP 67
Peso [kg] 1.4
Consumo fluidi (2x angolo nom.) [cm³] 36.0
Pressione d'esercizio nominale [bar] 6.0
Pressione d'esercizio min. [bar] 4.0
Pressione di esercizio max. [bar] 8.0
Diametro tubo flessibile di collegamento 6 x 3.9 x 1.05
Temperatura ambiente min. [°C] 5.0
Temperatura ambiente max. [°C] 60.0
Precisione di ripetibilità [°] 0.05
Coppia My max. [Nm] 10.4
Forza assiale max. Fz max. [N] 800.0
Versione con passaggio per fluidi Sì
Numero dei passaggi fluidi 4.0
Classe di camera bianca ISO 14644-1 5
Classe camera bianca ISO 14644-1 1999
Tutte le unità sono disponibili anche in versione FKM. Consultateci pure al riguardo.

General notes about the series

Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.

Pinion position
is always shown in the left end position. The pinion rotates from here to the right in clockwise direction. The arrow makes the direction of rotation clear.

Torque in the end positions
Please note that the final angular degrees (approx. 2°) before the end position can only be approached using the force of a single drive piston. For this reason, double actuated modules only have about half the rated torque available in this area. An external stop can be used to provide the full torque even in the end positions.

Travel to the pneumatic middle position
is carried out using only half of the nominal torque.

Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.

Housing material
Aluminum (extruded profile)

Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].

Operating principle
Double piston rack and pinion principle

Scope of delivery
Flow control valves, centering bushings, O-rings for direct connection, fitting screws (SRU-plus 63 only), assembly and operating manual with manufacturer’s declaration

Warranty
24 months

Service life characteristics
on request