arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
国の選択を変更して、お住まいの地域に関連する製品、サービス、および担当者に関する情報を表示します。
D 200-SSS-M-3205 유사 그림

D 200-SSS-M-3205

평평한 리니어 모듈
평평한 리니어 모듈 Delta, 크기: 200, 전동식, 스핀들 드라이브, 레일 가이드

  • 최대 스트로크: 1620 mm
  • 최대 추진력: 10000 N
최대 스트로크 H [mm] 1620.0
최대 추진력 [N] 10000.0
반복 정밀도 [mm] ± 0.03
최대 총 길이 [mm] 2000.0
최대 속도 [m/s] 0.25
최대 가속도 [m/s²] 20.0
최소 주위 온도 [°C] 0.0
최대 주위 온도 [°C] 80.0
슬라이드를 포함한 베이스의 사하중 [kg] 22.0
스트로크 100mm당 추가 질량 [kg] 2.6
슬라이드 중량 [kg] 8.4
슬라이드 플레이트 길이 [mm] 250.0
유도 시스템 레일 가이드
레일 수 2.0
레일 크기 25
드라이브 컨셉 스핀들 드라이브
유휴 토크 [Nm] 2.8
관성의 모멘트 [kgm²] 6.39E-4
스핀들 지름 [mm] 32.0
스핀들 피치 [mm] 5
최대 스핀들 속도 [1/min] 3000.0
길이 X [mm] 380.0
너비 Y [mm] 200.0
높이 Z [mm] 125.0
모멘트 Mx 최대 [Nm] 3500.0
모멘트 My 최대 [Nm] 4300.0
모멘트 Mz 최대 [Nm] 3200.0
포스 Fy 최대 [N] 5000.0
포스 Fz 최대 [N] 8000.0
포스 Fz 최대 [N] 5000.0
스핀들 축의 관성 모멘트는 1미터를 기준으로 합니다.

General notes about the series

Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.

Max. stroke
is the maximum permissible stroke. Acceleration and braking distances or possible overrun must be taken into consideration.

Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.

Acceleration and speed
The values specified are the maximum values of the units without loading. The actual accelerations and speeds for your application must be designed separately and can deviate from the maximum values.

Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.

Operating principle
Choice of toothed belt or ball screw spindle drive

Drive
servomotors of different providers can be trouble-free adapted

Profile
Extruded aluminum profile with plastic cover strip

Slide
Aluminum slide with a brush seal

Scope of delivery
Assembly and operating manual with declaration of incorporation

Warranty
24 months