arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
国の選択を変更して、お住まいの地域に関連する製品、サービス、および担当者に関する情報を表示します。
SRU-plus-D 25-W-180-3-VM-AS 類似のイラスト

SRU-plus-D 25-W-180-3-VM-AS

汎用旋回ユニット

ID 37361640

汎用旋回ユニット SRU-plus-D, サイズ: 25, 空圧式, フィードスルーなし, 回転角度: 180 °, 停止位置調節範囲: 3 °, ミドル位置、中央位置: 1 x VM (ロック式), 中央位置調節範囲: 3 °, エンド位置ダンパー: 油圧ダンパー

  • フルードフィードスルーの数: 0
  • トルク: 5 Nm
エンド位置ダンパー 油圧ダンパー
回転角度 [°] 180
停止位置調節範囲 [°] 3
トルク [Nm] 5.0
中間位置の数 1 x VM (ロック式)
中央位置調節範囲 [°] 3.0
IP 保護等級 67
重量 [kg] 2.6
流体消費量 (2x 定格角度) [cm³] 88.0
呼び作動圧力 [bar] 6.0
最低作動圧力 [bar] 4.0
最大作動圧 [bar] 6.5
接続ホース径 6 x 3.9 x 1.05
最低周囲温度 [°C] 5.0
最高周囲温度 [°C] 60.0
繰り返し精度 [°] 0.05
トルク My 最大 [Nm] 10.4
最大軸方向力 Fz (最大) [N] 800.0
フルードフィードスルーの数 0.0
クリーンルーム等級 ISO 14644-1 5
クリーンルーム等級: ISO 14644-1 1999
すべてのユニットはFKMバージョンでも利用可能です。詳細はお問い合わせ下さい。

General notes about the series

Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.

Pinion position
is always shown in the left end position. The pinion rotates from here to the right in clockwise direction. The arrow makes the direction of rotation clear.

Torque in the end positions
Please note that the final angular degrees (approx. 2°) before the end position can only be approached using the force of a single drive piston. For this reason, double actuated modules only have about half the rated torque available in this area. An external stop can be used to provide the full torque even in the end positions.

Travel to the pneumatic middle position
is carried out using only half of the nominal torque.

Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.

Housing material
Aluminum (extruded profile)

Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].

Operating principle
Double piston rack and pinion principle

Scope of delivery
Flow control valves, centering bushings, O-rings for direct connection, fitting screws (SRU-plus 63 only), assembly and operating manual with manufacturer’s declaration

Warranty
24 months

Service life characteristics
on request