CELSIO BT-DC 30 Ø6x80
Tepelně smrštitelný upínač nástrojů
ID 1428003
CELSIO BT-DC 30 Ø6x80, Upínače nástrojů
- Tepelně smrštitelný upínač nástrojů
- Řada: CELSIO
- Varianta Dual Contact
- Rozhraní upínače nástrojů: BT-DC 30
- Uchopovací průměr: 6 mm
- Projekční délka: 80 mm
- Obvodová házivost: ≤ 0,003 mm měřeno v upínacím otvoru (podle DIN 69882-8)
- Stupeň vyvážení: G2,5 při 25.000 ot/min nebo Umax < 1 gmm
- Min. točivý moment: 20 Nm
Technické údaje
| Technology | Heat shrinking toolholder |
|---|---|
| Series | CELSIO |
| Toolholder interface | BT-DC 30 |
| Clamping diameter D1 | 6 mm |
| D2 [mm] | 27.0 |
| D6 [mm] | 21.0 |
| Projecting length L1 [mm]/[inch] | 80 mm / 3.1" |
| L2 [mm] | 37.0 |
| L3 [mm] | 10.0 |
| L4 [mm] | 58.0 |
| G | M5 |
| Min. torque [Nm] | 20.0 |
| Weight [kg] | 1.0 |
| Dual Contact variant | yes |
| Coolant-proof | yes |
| Standard length | yes |
Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 JD
Face contact
Similar to DIN ISO 7388-2 JD however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces
Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)
Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)
Individual
Additional sizes and customized designs are available upon request