ROTA NCML
Hybrid chuck with manual workpiece centering
Hybrid chuck, which combines the advantages of centering via a 3-jaw manual lathe chuck and deformation-free clamping of the magnetic clamping technology of all ferromagnetic components.
Description
Advantages – Your benefits
- Workpiece centering via manual 3-jaw wedge bar chuck
No manual alignment of the workpiece is necessary - Deformation-free magnetic workpiece clamping
For maximum radial and axial run-out tolerances - High magnetic holding forces
Depending on the workpiece geometry and material, a high cutting performance is possible - For internal and external centering
For universal and flexible use - Optimal dirt sealing, encapsulated centering chuck
Low maintenance and ensured high clamping accuracy - Standard interface for centering jaws
Centering jaws can be manufactured from SCHUNK standard jaws - High clamping force due to jaw support
Improved cutting performance, particularly during hard turning - For grinding and hard turning
Ideal for high-precision workpiece machining - For horizontal and vertical machines
Suitable for use with almost every machine tool (turning – milling – grinding) - 3-sided machining possible due to retractable jaws
Reduced set-up costs, shorter processing times
Optionen und spezielle Informationen
- Verformungsarmes Spannen von Ringen und Scheiben
Das ROTA NCML ist eine Kombination aus Handspannfutter und Magnetspannfutter. Das Handspannfutter dient dazu, das Werkstück auf dem Futter zu zentrieren und anschließend über das Magnetspannfutter deformations- und vibrationsfrei zu spannen. Im Inneren des Magnetspannfutters sind Doppel-AlNiCo-Magnete verbaut, welche nach der Bearbeitung noch ein Entmagnetisieren des Werkstücks ermöglichen. - Angesteuert wird das Hybridspannfutter über eine Steuereinheit oder direkt über die Maschinensteuerung. Über Polverlängerungen kann das Werkstück auch noch vom Futter abgehoben und dann von drei Seiten bearbeitet werden.