KOM SK40 Ø16x160
결합 쉘 및 엔드밀 어댑터
ID 23000922
KOM SK40 Ø16x160, 툴홀더
- 결합 쉘 및 엔드밀 어댑터
- 시리즈: 결합 쉘 및 엔드밀 어댑터
- 툴홀더 인터페이스: SK 40
- 클램핑 지름: 16 mm
- 클램핑 지름의 스레드: M8
- 투영 길이: 160 mm
- 흔들림 정확도: 테이퍼에서 D1까지 측정 시 0.006mm 이하
- 밸런싱 등급: G2.5 @ 25,000 RPM 또는 Umax < 1 gmm
기술 세부 정보
Technology | Combination shell and end mill adapters |
---|---|
Series | Combination shell and end mill adapters |
Toolholder interface | SK 40 |
Toolholder standard | DIN ISO 7388-1 AD/AF |
Clamping diameter D1 | 16 mm |
Thread tightening bolt G | M8 |
D2 [mm] | 32 |
Projecting length L1 [mm]/[inch] | 160 mm / 6.3" |
L4 [mm] | 140.9 |
L11 [mm] | 27 |
L12 [mm] | 17 |
Weight [kg] | 1.73 |
Version
For mounting cutters with longitudinal or crosswise slot
Run-out accuracy
≤ 0.006 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 AD/AF
Bores for form AF are sealed for transport
Scope of delivery
Includes tightening bolt, drive ring, and feather key
Individual
Additional sizes and customized designs are available upon request