GMWI 16-S
ID 313165
- Úhel otevření: 3 °
- Max. okolní teplota: 60 °C
Información técnica
| Úhel uzavření na čelist [°] | 14.0 |
|---|---|
| Úhel otevření na čelist [°] | 3.0 |
| Moment otevírání [Nm] | 1.3 |
| Min. otevírací moment u pružiny [Nm] | 0.4 |
| Vlastní hmotnost [kg] | 0.26 |
| Objem válce na dvojitý zdvih [cm³] | 1.1 |
| Min. provozní tlak [bar] | 5.0 |
| Max. provozní tlak [bar] | 8.0 |
| Jmenovitý provozní tlak [bar] | 6.0 |
| Doba zavření [s] | 0.025 |
| Doba otevření [s] | 0.015 |
| Max. přípustná délka prstu [mm] | 30.0 |
| Max. přípustná hmotnost jednoho prstu [kg] | 0.075 |
| Třída ochrany IP | 40 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 60.0 |
| Opakovatelná přesnost [mm] | 0.02 |
| Max. moment Mx [Nm] | 2.0 |
| Max. moment Mz [Nm] | 0.8 |
| Max. axiální síla Fz max. [N] | 60.0 |
Max. loads
Max. loads
The indicated moments and forces apply for each base jaw and may appear simultaneously.
General notes about the series
Closing moment
is the arithmetic sum of the individual moment applied to each jaw.
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
Closing and opening times
are movement times of the base jaws only, without application-specific gripper fingers. Valve switching times, hose fill times, or PLC reaction times are not included, and are to be considered when cycle times are calculated.
Operating principle
force-guided lever gear
Housing material
Aluminum alloy, anodized
Base jaw material
Steel
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Warranty
24 months
Scope of delivery
Completely ready for operation without bracket for proximity switch and without proximity switch
Gripping force maintenance
possible by using the version with mechanical gripping force maintenance or pressure maintenance valve SDV-P