MMSK 22-PI1-S-NPN-HD
Programmable magnetic switches
ID 301113
This product has been discontinued and is no longer available.
Programmable magnetic switch MMS 22-PI1, Heavy duty version, Teach function, C-slot
- Number of switching points: 1
- Switching type: NPN
- Closer
- Cable length: 200 cm
- Electrical connection: open wire strands
- Nominal voltage: 24 V
Technical details
| Measuring principle | magnetic |
|---|---|
| Switching function | Closer |
| Type of switching | NPN |
| Number of switching points | 1 |
| Teach function | yes |
| typical switching time [s] | 0.001 |
| Max. switching frequency [Hz] | 1000.0 |
| Min. ambient temperature [°C] | -20.0 |
| Max. ambient temperature [°C] | 80.0 |
| LED display in sensor | yes |
| Type of voltage | DC |
| Nominal voltage | 24.0 |
| Min. operating voltage | 10.0 |
| Max. operating voltage | 30.0 |
| Voltage drop [V] | 1.5 |
| Max. switching current | 0.05 |
| Short circuit protection | yes |
| Protected against polarity reversal | yes |
| Housing material | stainless steel |
| Cable connector/cable end | open wire strands |
| Cable length L [cm] | 200.0 |
| Cable diameter D [mm] | 2.2 |
| Cable design (wire cross section/number of wires) | 3x 0,05mm2 |
| Cable sheath material | PUR |
| Min. bending radius (dynamic) [mm] | 22.0 |
| Min. bending radius (static) [mm] | 11.0 |
| Weight [kg] | 0.04 |
| Protection class IP (sensor, plugged) | 67 |
| Protection class | III |
| Drilling emulsion resistance * | yes |
| Heavy duty version | yes |
*Tested cutting emulsions: r.rhenus TU 43P, Motorex Swisscool Magnum UX 550 and Oemeta 760 (1008339).
시리즈에 관한 일반 참고 사항
SCHUNK 그리핑 모듈, 회전 및 리니어 모듈, 로봇 액세서리는 적절한 SCHUNK 센서로 모니터링해야 합니다. 모든 것이 서로 맞도록 조정되어 있기 때문입니다.
센서와 제품의 조정은 파라미터 유형과 자석 강도, 간극, 벽 두께, 자석과 센서 사이 벽 재료, 그리고 정렬과 센서 민감성의 상호 작용을 특징으로 합니다.
SCHUNK 제품에 통합되는 다른 제조업체의 센서는 탁월한 전환 결과를 제공는 경우가 거의 없습니다. 게다가 SCHUNK는 그러한 제품의 올바른 기능이나 기능적인 안전을 보장할 수 없습니다.
센서의 정밀도가 상대적으로 높기 때문에 학습 온도와 작업 온도의 차이가 30K를 초과하면 안 됩니다.
하우징 재료
PA
케이블 코팅 재료
PUR
설치
센서 홈에 클램핑되고 소켓 헤드 나사로 고정
보증
24개월