TENDO RLA
Portaherramientas hidráulico
Mediante el ajuste del juego de engranajes sensible, el exterminador del tiempo de preparación se encarga del posicionamiento preciso en el rango de los micrómetros del tamaño de la herramienta. El tornillo de ajuste longitudinal, está equipado con un tope delantero y un tope posterior.
Denominación
Advantages – Your benefits
- Compact adjustment gears
This ensures micron-precise length adjustment of the metal-cutting tool. - No change of the position
Due to the self-locking adjusting screw - No radial change of the adjustment screw
The balancing grade is not affected - Micron precise length adjustment
10 mm adjustment travel for all clamping diameters with a front and back stop of the adjustment screw - Micron-precise tool change within seconds without peripheral equipment
Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices - Permanent run-out and repeat accuracy < 0.003 mm
Even cutting action, increased tool service life, and reduced costs for regrinding or buying new tools - Fine-balanced by default
Suitable for high speeds with a balancing grade of G2.5 at 25,000 RPM - Comprehensive compatibility
Can be ideally combined with TRIBOS SVL tool extensions - Excellent vibration damping
Micro-blowouts are prevented, optimal workpiece surfaces, machine spindle protection, increased tool service life resulting in a reduction of costs - Exact length preadjustment
Can be actuated radially or axially for quick and easy tool presetting - High level of flexibility
Clamping of different diameters due to the use of slotted or coolant-proof intermediate sleeves - All commercially available tool shank types can be clamped
Form A: with smooth cylindrical shank, shank form A in accordance with DIN 1835 and DIN 6535 HA Form AB: with flat face and cylindrical shank with pulling face, shank form B in accordance with DIN 1835 and DIN 6535 HB Form B: with lateral pulling faces, shank form B in accordance with DIN 1835 Form E: with inclined clamping face, shank form E in accordance with DIN 1835 and DIN 6535 HE
Options and special information
- Flexible clamping areas due to the use of intermediate sleeves
Intermediate sleeves allow clamping of various shank diameters from 3 - 32 mm with just one toolholder. Your advantage: Reduction of the acquisition costs, higher clamping force at the given shank diameter.