KRF3-LH 100-Z
ID 1518297
特長:
- 3 ジョークランピングブロック
- センタークランプ
- ロングストローク
- ジグ生成位置決めボア
- ベースジョー: 精密セレーション、タングと溝
- 寸法: 100 x 100 x 69,2 mm
- 把持力範囲: 3 - 5 kN
- ターボによる把持力範囲: 9 - 11 kN
- 片側ストローク: 6 mm
- 最大ジョー高さ: 150 mm
- 繰り返し精度: 0.01 mm
- 開放圧力: 6 - 9 bar
- 最高ターボ圧力: 6 bar
- ストロークごとの圧縮空気消費量: 500 cm³
- 閉 / 開時間: 0.2 s
- 重量: 4.5 kg
技術的詳細
| 片側ストローク [mm] | 6.0 |
|---|---|
| 最小把持力 [kN] | 3.0 |
| 最大把持力 [kN] | 5.0 |
| バイスの繰り返し精度 [mm] | 0.01 |
| 最大ジョー高さ [mm] | 150.0 |
| 距離 H [mm] | 16.0 |
| ストロークごとの 6 bar での圧縮空気消費量 [cm³] | 500.0 |
| 閉 / 開時間 [s] | 0.2 |
| 重量 [kg] | 4.5 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Clamping force range
The clamping force depends on the stroke due to the spring tension. Max. clamping force is reached in the "open" condition, min. clamping force in the "closed" condition.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)