RM 110-W90-2
ID 313992
- 토크: 1.95 Nm
기술 세부 정보
토크 [Nm] | 1.95 |
---|---|
최대 작동 압력 [bar] | 8.0 |
중량 [kg] | 1.12 |
정격 가동 압력 [bar] | 6.0 |
IP 보호등급 | 40 |
최소 주위 온도 [°C] | 5.0 |
최대 주위 온도 [°C] | 60.0 |
최소 작동 압력 [bar] | 3.0 |
모멘트 My 최대 [Nm] | 12.0 |
최대 축 포스 Fz 최대 [N] | 1200.0 |
높이 Z [mm] | 85.0 |
너비 Y [mm] | 101.5 |
길이 X [mm] | 65.0 |
부하가 없는 회전 시간(공칭 회전 각도의 1배) [s] | 0.17 |
회전 각도 [°] | 90 |
말단 위치 조정 능력 [°] | 5 |
유체 소비(2x 정격 각도) [cm³] | 30.0 |
반복 정밀도 [°] | 0.036 |
선회 모듈 구성에는 온라인에서 제공되는 Toolbox 소프트웨어 사용이 권장됩니다. 선택 유닛의 크기 검증은 절대적으로 필요합니다. 그러지 않으면 오버로드가 발생할 수 있습니다.
요청 시 다른 각도도 가능합니다.
Dimensions and maximum loads
Range of use for dampers
Dimensions and maximum loads
The indicated moments and forces are statical values and may appear simultaneously. Throttling has to be done for ensuring that the rotary movement takes place without impact or bouncing. Otherwise the service life reduces.
Range of use for dampers
- X축:
- Mass moment of inertia
- Y축:
- Angle of rotation
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Flange position
is always drawn in the left end position. It rotates from here to the right in clockwise direction. The arrow points out the direction of rotation.
Customized angle of rotation
More swivel angles are available on request.
Layout or control calculation
For configuration or control calculation of the units, we recommend to use our Toolbox software, which is available online. Verifying the sizing of the selected unit is absolutely necessary, as otherwise overloading may occur.
Swivel vane material
Steel
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Vane swivel unit
Scope of delivery
Completely ready for operation without bracket for proximity switch and without proximity switch
Warranty
24 months
Service life characteristics
on request