TENDO E compact
Mandrino idraulico
Il mandrino idraulico TENDO E compact convince in applicazioni di fresatura, foratura, alesatura, filettatura e HPC. Tutto con un incremento di durata degli utensili del 300%.
La variante Dual Contact con contatto simultaneo tra cono e superficie di appoggio piana chiude lo spazio tra la flangia del portautensile e la parte anteriore del mandrino macchina con l'interfaccia della superficie di appoggio piana.
La variante Dual Contact con contatto simultaneo tra cono e superficie di appoggio piana chiude lo spazio tra la flangia del portautensile e la parte anteriore del mandrino macchina con l'interfaccia della superficie di appoggio piana.
Descrizione
Advantages – Your benefits
- High torque for maximum volume machining
Its compact design ensures high holding forces and thus a high torque transmission - High radial rigidity
No lateral deflection during the metal cutting process and high shape accuracy of the workpiece combined with optimal removal rates - High level of flexibility
Clamping of different diameters due to the use of slotted or coolant-proof intermediate sleeves - Fine-balanced by default
Suitable for high speeds and HPC/HSC machining centers with a balancing grade of G2.5 at 25,000 RPM - Excellent vibration damping
Micro-blowouts are prevented, optimal workpiece surfaces, machine spindle protection, increased tool service life resulting in a reduction of costs - Permanent run-out and repeat accuracy ≤0.003 mm
Even cutting action, increased tool service life, and reduced costs for regrinding or buying new tools - Micron-precise tool change within seconds without peripheral equipment
Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices - Dirt grooves for reliable torque transmission
Dry clamping surfaces, by displacement of oil, grease or lubricant residues into the dirt groove - Comprehensive compatibility
Can be ideally combined with TRIBOS SVL tool extensions - All commercially available tool shank types can be clamped
Form A: with smooth cylindrical shank, shank form A in accordance with DIN 1835 and DIN 6535 HA Form AB: with flat face and cylindrical shank with pulling face, shank form B in accordance with DIN 1835 and DIN 6535 HB Form B: with lateral pulling faces, shank form B in accordance with DIN 1835 Form E: with inclined clamping face, shank form E in accordance with DIN 1835 and DIN 6535 HE
Options and special information
- Flexible clamping areas due to the use of intermediate sleeves
Intermediate sleeves allow clamping of various shank diameters from 3 - 32 mm with just one toolholder. Your advantage: Reduction of the acquisition costs, higher clamping force at the given shank diameter.