GWA-080
ID 302520
Alternativní produkty:
- Počet průchodů médií: 6
- Počet elektrických průchodů: 36
- Max. síla Fz : 2500 N
- Max. síla Fd: 5000 N
- Max. celkové užitečné zatížení: 86 kg
- Třída ochrany IP: 65
Technické údaje
| Recommended handling weight [kg] | 86.0 |
|---|---|
| Repeat accuracy [mm] | 0.04 |
| Weight [kg] | 0.4 |
| Max. distance when locking [mm] | 2.0 |
| Number of pneumatic feed-throughs | 6.0 |
| Air connection thread pneumatic feed-through | M5 |
| Number of pneumatic feed-throughs | 2.0 |
| Connection threads for fluid feed-through | G1/8" |
| Number of electrical feed-throughs | 36.0 |
| Max. permissible XY axis offset [mm] | ± 1.5 |
| Max. permissible angular offset [°] | ± 1 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 60.0 |
| Min. operating pressure [bar] | 4.5 |
| Max. operating pressure [bar] | 6.0 |
| Length X [mm] | 80.0 |
| Width Y [mm] | 160.0 |
| Height Z [mm] | 16.0 |
| Moment Mx max. [Nm] | 100.0 |
| Moment My max. [Nm] | 100.0 |
| Moment Mz max. [Nm] | 200.0 |
| Force Fz max. [N] | 2500.0 |
| Max. force Fd [N] | 5000.0 |
Dimensions and maximum loads
Dimensions and maximum loads
This is the max. sum of all forces and moments which are permitted to act on the change system for ensuring proper functioning.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Wedge gear with surface power transmission
Media transmission
for electrical Energy: 2x 18 pins 0.14 mm2; 60 V~; max. 1 A are included in the scope of delivery. Optionally available: 4 pins 2.5 mm2; 350 V/B~; max 25 A as per VDE guidelines
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Operating and maintenance instructions, manufacturer’s declaration, electronic modules
Warranty
24 months