KSE3-LH 160 IOL
ID 1465974
제품 특징:
- 전자기계 2죠 클램핑 포스 블록
- IO-Link를 통한 제어
- 중앙 클램핑
- 롱 스트로크
- IO-Link를 통한 죠 위치 모니터링
- 베이스 죠: 미세 톱니바퀴 및 텅앤그루브
- 가능한 클램핑 포스 범위: 4.5 - 15 kN
- 죠당 스트로크: 8 mm
- 이동 속도 죠: 0.8 mm/s
- 작동 전압 제어 유닛: 24 V DC
- 작동 전압 액추에이터: 24 V DC
- 대기 전류: 70 mA
- 평균 전류 소비: 800 mA
- 최대 전류 입력: 5000 mA
- 최대 죠 높이: 200 mm
- 반복 정밀도: 0.01 mm
- 중량: 12.9 kg
기술 세부 정보
| 죠당 스트로크 [mm] | 8.0 |
|---|---|
| 최소 클램핑 포스 [kN] | 4.5 |
| 최대 클램핑 포스 [kN] | 15.0 |
| 작동 전압 제어 유닛 [V DC] | 24.0 |
| 작동 전압 액추에이터 [V DC] | 24.0 |
| 대기 전류 [mA] | 70.0 |
| 평균 전류 소비 [mA] | 800.0 |
| 최대 전류 입력 [mA] | 5000.0 |
| 이동 속도 죠 [mm/s] | 0.8 |
| 바이스의 반복 정확도 [mm] | 0.01 |
| 최대 죠 높이 [mm] | 200.0 |
| 거리 H [mm] | 25.0 |
| 중량 [kg] | 12.9 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual; without rigid contact for integration into the machine control
Clamping force
Clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H".
Possible clamping force range
Adjustment range for the clamping force. The target clamping force is set as a percentage in the software.
Average current consumption
Average current consumption over one clamping cycle (clamping/opening).
Max. current input
Maximum current consumption, max. once per clamping cycle.
Travel speed jaws
Maximum possible travel speed with high clamping forces. With lower clamping forces, the travel speed may be slower.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)