TENDO EC CAT-DC 40 Ø3/4"x4"
ID 1324776
- 유압 확장 툴홀더
- 시리즈: TENDO E compact
- Dual Contact 버전
- 툴홀더 인터페이스: CAT-DC 40
- 클램핑 지름: 3/4"
- 투영 길이: 101.6 mm
- 흔들림 정확도: 2.5 x D에서 0.003mm 이하
- 밸런싱 등급: G2.5 @ 25,000 RPM 또는 Umax < 1 gmm
- 최소 토크: 520 Nm
기술 세부 정보
| Technology | Hydraulic expansion toolholder |
|---|---|
| Series | TENDO E compact |
| Toolholder interface | CAT-DC 40 |
| Clamping diameter D1 | 3/4" |
| D2 [mm] | 49.0 |
| D6 [mm] | 38.0 |
| Projecting length L1 [mm]/[inch] | 101,6 mm / 4.0" |
| L2 [mm] | 51.0 |
| L3 [mm] | 10.0 |
| L4 [mm] | 82.55 |
| G | M8x1 |
| Min. torque [Nm] | 520.0 |
| Weight [kg] | 1.8 |
| Dual Contact variant | yes |
| Coolant-proof | yes |
Version
TENDO E compact (E compact = excellent cost-performance ratio)
Short, rigid design
Run-out accuracy
≤ 0.003 mm at 2.5 x D
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Intermediate sleeves
Additional shank diameters can be clamped using intermediate sleeves
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ASME B5.50
Bores for form AF are sealed with set-screws as transport safety
Face contact
Similar to ASME B5.50 however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces
Length-setting screw
With adjustment screw for axial length adjustment
Scope of delivery
Does not include an actuation key
Individual
Additional sizes and customized designs are available upon request