CELSIO BT-DC 40 Ø5x90
Tepelně smrštitelný upínač nástrojů
ID 1428307
CELSIO BT-DC 40 Ø5x90, Upínače nástrojů
- Tepelně smrštitelný upínač nástrojů
- Řada: CELSIO
- Varianta Dual Contact
- Rozhraní upínače nástrojů: BT-DC 40
- Uchopovací průměr: 5 mm
- Projekční délka: 90 mm
- Obvodová házivost: ≤ 0,003 mm měřeno v upínacím otvoru (podle DIN 69882-8)
- Stupeň vyvážení: G2,5 při 25.000 ot/min nebo Umax < 1 gmm
- Min. točivý moment: 8 Nm
Technické údaje
| Technology | Tepelně smrštitelný upínač nástrojů |
|---|---|
| Series | CELSIO |
| Toolholder interface | BT-DC 40 |
| Clamping diameter D1 | 5 mm |
| D2 [mm] | 17.0 |
| D6 [mm] | 12.0 |
| Projecting length L1 [mm]/[inch] | 90 mm / 3.5" |
| L4 [mm] | 63.0 |
| Min. torque [Nm] | 8.0 |
| Weight [kg] | 1.1 |
| Dual Contact variant | ano |
| Coolant-proof | ano |
| Standard length | ano |
Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport
Face contact
Similar to DIN ISO 7388-2 JD/JF however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces
Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)
Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)
Individual
Additional sizes and customized designs are available upon request