LDN-UL-0200
- 최대 스트로크: 2600 mm
- 최대 추진력: 500 N
기술 세부 정보
| 드라이브 컨셉 | 리니어 다이렉트 드라이브 |
|---|---|
| 최대 스트로크 H [mm] | 2600.0 |
| 최대 추진력 [N] | 500.0 |
| 정격 포스 [N] | 205.0 |
| 최대 탑재량(수평) [kg] | 25.0 |
| 반복 정밀도 [mm] | ± 0.01 |
| 최대 속도 [m/s] | 4.0 |
| 최대 가속도 [m/s²] | 40.0 |
| 최대 전류 [A] | 15.0 |
| 최대 정지 전류 [A] | 3.53 |
| 최소 주위 온도 [°C] | 5.0 |
| 최대 주위 온도 [°C] | 40.0 |
| 무게 슬라이드 및 모터 [kg] | 6.01 |
| 말단 플레이트 중량 [kg] | 0.84 |
| 스트로크 100mm당 추가 질량 [kg] | 0.97 |
| 길이 X [mm] | 350.0 |
| 너비 Y [mm] | 95.0 |
| 높이 Z [mm] | 146.5 |
| 모멘트 Mx 최대 [Nm] | 264.0 |
| 모멘트 My 최대 [Nm] | 1540.0 |
| 모멘트 Mz 최대 [Nm] | 1540.0 |
| 포스 Fy 최대 [N] | 12080.0 |
| 포스 Fz 최대 [N] | 12080.0 |
| 포스 Fz 최대 [N] | 12080.0 |
| 길이 A [mm] | 290.0 |
| 길이 L [mm] | 350.0 |
| 길이 L1 [mm] | 320.0 |
| 길이 L2 [mm] | 175.0 |
| 지원 버전 | 예 |
Dimensions and maximum loads
Dimensions and maximum loads
The forces and torques shown here are maximum values for static loading.
General notes about the series
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
How to get to the online configurator
The configurator is either linked on the SCHUNK website via the appropriate linear unit or can https://schunk.com/de/de/konfigurator-linearmodule called up directly.
Guidance
Roller guide
Drive
Linear direct drive based on a 3-phase, electronically commutated and permanently excited AC synchronous liner motor
Stroke measuring system
Contactless, magnetic measuring system with incremental and absolute variants; with HIPERFACE®, 1Vss and DRIVE-CLiQ interfaces.
Profile
Aluminum press-drawn section with ground steel guide strips
Slide
Aluminum slide, primary part and measuring system reading head directly integrated
Scope of delivery
Accessory pack with centering sleeves and assembly and operating manual with declaration of incorporation
Drive controller
Consultation on parameter settings for drive controllers from BOSCH (EcoDrive CS, IndraDrive and IndraDrive CS) and Siemens (Sinamics S120). Provision of motor data sheets for other drive controllers. Commissioning support on request.
Warranty
24 months
Service life characteristics
on request