KSF3-F 200
ID 1514336
제품 특징:
- 2-죠 조임력 블록
- 고정 죠 사용
- 표준 스트로크
- 베이스 죠: 미세 톱니바퀴 및 텅앤그루브
- 치수: 200 x 200 x 90,2 mm
- 클램핑 포스 범위: 26 - 35 kN
- 죠당 스트로크: 8 mm
- 최대 죠 높이: 100 mm
- 반복 정밀도: 0.01 mm
- 개방 압력: 6 - 9 bar
- 스트로크당 공기 소모량: 2550 cm³
- 닫힘시/열림시 시간: 1.2 s
- 중량: 24 kg
기술 세부 정보
| Stroke per jaw [mm] | 8.0 |
|---|---|
| Min. clamping force [kN] | 26.0 |
| Max. clamping force [kN] | 35.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 100.0 |
| Distance H [mm] | 30.0 |
| Air consumption per stroke at 6 bar [cm³] | 2550.0 |
| Closing/opening time [s] | 1.2 |
| Weight [kg] | 24.0 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Clamping force range
The clamping force depends on the stroke due to the spring tension. Max. clamping force is reached in the "open" condition, min. clamping force in the "closed" condition.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)