WELDON 엔드 밀 홀더를 사용하여 원통형 섕크의 수평 클램핑 표면에 클램핑 툴을 안정적으로 클램핑할 수 있습니다. 장착부의 클램핑 나사로 인해 툴을 비틀거나 빼낼 수 없습니다. 마운팅은 DIN 1835B 및 DIN 6535HB에 따라 콜릿 척에 원통형 섕크가 있는 클램핑 툴에 적합합니다. 슬림형 WELDON 엔드밀 홀더용 제공 범위에 포함되는 클램핑 나사나 볼헤드와 길이 조절 나사가 포함된 클램핑 나사.
The WELDON end mill holder enables secure clamping of tools with a cylindrical shank and lateral clamping surface, and prevents twisting and pulling out thanks to a clamping screw and is compatible with DIN 1835B and DIN 6535HB. The clamping screw is also supplied. The Cool Flow version offers peripheral cooling through cooling channels, which can be closed with M3 screws, and guides the coolant directly to the cutting edge of the tool. The Dual Contact design with simultaneous taper and flat work surface ensures that the gap between the tool flange and the spindle face is compensated for with corresponding machine interfaces.
WELDON Slim end mill holders can be used to reliably clamp tools with a lateral clamping face on the cylindrical shank. Due to the toolholder′s clamping screw, the tool cannot be turned or pulled out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835B and DIN 6535HB. Clamping screw with ball head and length adjustment screw are included in the scope of delivery. The WELDON Slim Cool Flow variant enables peripheral cooling by means of cooling channels in the wall, which can be optionally closed/sealed again with two M3 screws. The coolant is fed directly to the cutting edge of the tool.
