IN 40-O-M12
Inductive proximity switches
ID 301584
Inductive proximity switch IN
- Number of switching points: 1
- Switching distance: 0.8 mm
- Cylindrical sensor
- Sensor diameter: 4 mm
- Switching type: PNP
- Opener
- Cable length: 30 cm
- Electrical connection: M12 connector, 3-pin
- Nominal voltage: 24 V
Technical details
| Measuring principle | inductive |
|---|---|
| Switching function | Opener |
| Type of switching | PNP |
| Number of switching points | 1 |
| Switching distance [mm] | 0.8 |
| Switching hysterisis from the nominal switching distance | < 5% |
| Max. switching frequency [Hz] | 3000.0 |
| Min. ambient temperature [°C] | -25.0 |
| Max. ambient temperature [°C] | 70.0 |
| LED display in sensor | yes |
| Type of voltage | DC |
| Nominal voltage | 24.0 |
| Min. operating voltage | 10.0 |
| Max. operating voltage | 30.0 |
| Voltage drop [V] | 0.6 |
| Max. switching current | 0.2 |
| Short circuit protection | yes |
| Protected against polarity reversal | yes |
| Housing material | stainless steel |
| Cable connector/cable end | M12 connector, 3-pin |
| Cable length L [cm] | 30.0 |
| Cable diameter D [mm] | 3.3 |
| Cable design (wire cross section/number of wires) | 3x 0.14mm2 |
| Cable sheath material | PUR |
| Min. bending radius (dynamic) [mm] | 34.0 |
| Min. bending radius (static) [mm] | 17.0 |
| Weight [kg] | 0.02 |
| Protection class IP (sensor, plugged) | 67 |
| Drilling emulsion resistance * | yes |
*Tested cutting emulsions: r.rhenus TU 43P, Motorex Swisscool Magnum UX 550 and Oemeta 760 (1008339).
モデルシリーズに関する一般注意事項
SCHUNKのグリッパー、旋回モジュール、リニア軸、ロボットアクセサリには、必ずSCHUNK製の適切なセンサーを使用してモニタリングしてください。これらは互いに最適な組み合わせとなるよう設計されています。
スイッチング距離、スイッチング機能、ヒステリシス、電圧などの主要特性が十分に類似している場合は、シュンク製の誘導型近接スイッチ (IN、INK) の代わりに他のメーカーの近接スイッチを通常は使用することができます。
ただし、他のメーカーのセンサーをシュンク製品と一緒に使用しても、優れたスイッチング結果が得られることはほとんどありません。また、当社は製品が適切または安全に機能することを保証できません。